| Model Number |
24700 |
| Medical Device Problem Code |
Material Rupture (1546)
|
| Health Effect - Clinical Code |
No Clinical Signs, Symptoms or Conditions (4582)
|
| Date of Event |
08/04/2023
|
|
Type of Reportable Event
|
Malfunction
|
|
Event or Problem Description
|
|
It was reported that balloon rupture occurred.The 90% stenosed target lesion was located in the shunt in the moderately tortuous and mildly calcified central forearm artery.A 6.0mm x 100mm x 80cm hybrid sterling balloon catheter was advanced for dilatation.Inflation was performed three times.However, during the third inflation at 14 atmospheres, the balloon ruptured.The procedure was completed with this device and removed.There were no patient complications nor injuries reported.
|
| |
|
Additional Manufacturer Narrative
|
|
Device evaluated by mfr.: returned product consisted of a sterling balloon catheter.The outer shaft, inner shaft, balloon and tip were visually and microscopically examined.Visual examination revealed no damages.Microscopic examination revealed a pinhole in the balloon 10mm from the tip.Inspection of the remainder of the device presented no other damage or irregularities.Product analysis confirmed there is a pinhole in the balloon.
|
| |
|
Event or Problem Description
|
|
It was reported that balloon rupture occurred.The 90% stenosed target lesion was located in the shunt in the moderately tortuous and mildly calcified central forearm artery.A 6.0mm x 100mm x 80cm hybrid sterling balloon catheter was advanced for dilatation.Inflation was performed three times.However, during the third inflation at 14 atmospheres, the balloon ruptured.The procedure was completed with this device and removed.There were no patient complications nor injuries reported.
|
| |
|
Search Alerts/Recalls
|