|
It was reported that on (b)(6), 2023, the surgeon stated that a 2.4mm x 14mm cortex screw would not advance into the bone.Upon inspection, it appears that the screw head and self-tapping cutout on the screw tip is abnormal.Surgeon described that it is a flaw in the screw.Screw was removed and replaced with another screw of the same size and type.Patient has history of epilepsy.There was a surgical delay of 3 minutes.The procedure was completed successfully.There was no patient consequences.This report is for one (1) 2.4 cortex screw slf-tpng t8 sd rec 14.This is report 1 of 2 for complaint (b)(4).
|
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.D2b: additional product code: hrs.D9: complainant part is expected to be returned for manufacturer review/investigation but has yet to be received.H3, h4, h6: without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|