MAUDE Adverse Event Report: ETHICON INC. VCL CT BRD VIO 8X18IN 3-0 S/A RB-1 CR; SUTURE, ABSORBABLE, SYNTHETIC

Catalog Number	J713D
Medical Device Problem Code	Material Separation (1562)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported that a patient underwent an unknown procedure on an unknown date and suture was used.During the procedure, when the suture and needle were pulled, the needle stuck to the suture by about 1 mm.The same thing happened to about three of the one package.These were control release needles.No adverse patient consequences were reported.Additional information was requested.
Additional Manufacturer Narrative
Product complaint # : (b)(4).H6 component code: g07002 - device not returned.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon inc, or its employees that the report constitutes an admission that the product, ethicon inc or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.Additional information was requested, and the following was obtained via: " please provide more details about the issue? if any new information will be made available, the additional information will be submitted in ecm note.Did the devices had a pull off suture needle issue or did the issue was a control release needle too tight? please clarify when the suture and needle were pulled, it was foudn that the needle stuck to the suture by about 1 mm.When did the issue occurred (removal from package /during passage through tissue/ during tying / post-op)? when the suture and needle were pulled.What is the lot number? unk.Please perform and document the follow up attempt for product return.Please document the shipment tracking number in notes or rmao sections.We regularly contact with sales rep about the device returning.Please provide the source or name of person providing answers to follow-up questions (not the person relaying/submitting answers to loc or chu).(b)(6).Lot number : unk spmcs.Events reported via: 2210968-2023-06241, 2210968-2023-06243.
Additional Manufacturer Narrative
Product complaint # (b)(4).Date sent to the fda: 10/18/2023.A review of the batch manufacturing records was conducted, and no related non-conformances were identified h3 investigational summary: the product received for analysis was identified as product code j713d.Visual inspection and metallurgical analysis were performed on the returned product.A fracture was observed at the suture attachment of the needle.One side of the needle was received, the mating fracture surface was not provided for this evaluation.The needle was noted with marks that appears to be by surgical instrument.A scanning electron microscope (sem) was used to examine the fracture surface and surrounding area of the needle.The fracture surfaces were examined in multiple locations to determine the fracture mode.The evaluation of the sample revealed the fracture was composed of microvoid coalescence, which is evidence of a ductile fracture mode.This was a ductile fracture.The evidence of this examination indicates that the breakage occurred at the attachment area of the needle during use due to tensile overload.There is no evidence of any material flaw or defect that would cause premature failure.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon inc, or its employees that the report constitutes an admission that the product, ethicon inc or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Related reports: 2210968-2023-06242, 2210968-2023-06241, and 2210968-2023-06243.

• Brand Name: VCL CT BRD VIO 8X18IN 3-0 S/A RB-1 CR
• Common Device Name: SUTURE, ABSORBABLE, SYNTHETIC
• Manufacturer (Section D): ETHICON INC.; 1000 route 202; raritan NJ 08869
• Manufacturer (Section G): ETHICON INC.-JUAREZ; calle durango #2751; ciudad juarez 32575 ; MX 32575
• Manufacturer Contact: elba bello ; 1000 route 202; raritan, NJ 08869 ; 9083863534
• MDR Report Key: 17638634
• Report Number: 2210968-2023-06242
• Device Sequence Number: 20827842
• Product Code: GAM
• UDI-Device Identifier: 10705031042469
• UDI-Public: 10705031042469
• Combination Product (Y/N): N
• Initial Reporter Country: JA
• PMA/510(K) Number: K022269
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 10/18/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: J713D
• Device Lot Number: SPMCST
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 08/01/2023
• Supplement Date Received by Manufacturer: 09/22/2023
• Initial Report FDA Received Date: 08/28/2023
• Supplement Report FDA Received Date: 10/18/2023
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 12/06/2022
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown