MAUDE Adverse Event Report: SYNTHES GMBH 13.0MM REAMER HEAD FOR RIA 2 STERILE

Catalog Number	03.404.022S
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	10/10/2023
Type of Reportable Event	Malfunction
Event or Problem Description
Device report from colombia reports an event as follows: it was reported that on (b)(6) 2023 during an unknown procedure, the two ria 2 reamer heads were damaged.There was no reported adverse patient impact.No further information is available.This report is for a 13.0mm reamer head for ria 2 sterile.This is report 1 of 2 for (b)(4).
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: d2: additional procode: hrx.D9: complainant part is expected to be returned for manufacturer review/investigation, but has yet to be received.H3, h6: the investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H3, h4, h6: the product was not returned to depuy synthes, however photos were provided for review.The photo investigation revealed that proximal portion of the reamer head f/ria 2 ø13 was broken.The observed condition of the device was consistent with a random component failure that may have been caused by exposure to unintended forces.Since the device was not returned, a dimensional inspection cannot be performed.The overall complaint was confirmed as the observed condition of the reamer head f/ria 2 ø13 would contribute to the complained device issue.Based on the investigation findings, potential cause can be attributed to unintended use error and it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the complaint condition.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history review (dhr): manufacturing location: supplier ¿ (b)(4) / inspected and packaged by: monument release to warehouse date: 06-may-2023 expiration date: 01-apr-2033 part number: 03.404.022s, 13.0mm reamer head for ria 2-sterile lot number: 5717p03 (sterile) lot quantity: (b)(4).Production order traveler met all inspection acceptance criteria.Packaging label log (pll) was reviewed and determined to be conforming.Packaging bom was reviewed and determined to be conforming with no deviations to normal packaging identified.Scn was reviewed and determined to be conforming.This lot met all dimensional, visual, sterility and packaging criteria at the time of release with no issues documented during the inspection or release of the product that would contribute to this complaint condition.Component part(s) reviewed: part number: 03.404m022, ria ii reamer head 13.0mm, lot number: 4450p94, lot quantity: (b)(4).Inspection instruction met all inspection acceptance criteria.Inspection sheet, incoming final inspection met all inspection acceptance criteria.Certificate of compliance received from (b)(4)manufacturing (mark two engineering) dated 31-mar-2023 was reviewed and determined to be conforming.Certification for heat treat supplied to (b)(4) manufacturing from vacu-braze inc.Dated 03-mar-2023 was reviewed and determined to be conforming.Heat treat certified to be within specified range.Certificate of compliance supplied to jabil (elmira) from boston centerless dated 24-aug-2021 was reviewed and determined to be conforming.Raw material certificate of tests supplied to boston centerless from carpenter dated 17-feb-2021 was reviewed and determined to be conforming.This lot met all dimensional, visual and packaging criteria at the time of release with no issues documented during the manufacture that would contribute to this complaint condition.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 date of concomitant therapy is (b)(6) 2023.

• Brand Name: 13.0MM REAMER HEAD FOR RIA 2 STERILE
• Common Device Name: REAMER
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): MONUMENT; 1101 synthes avenue; monument CO 80132
• Manufacturer Contact: kate karberg ; 1302 wright lane east; west chester, PA 19380 ; 3035526892
• MDR Report Key: 18039184
• Report Number: 8030965-2023-13576
• Device Sequence Number: 12617349
• Product Code: HTO
• UDI-Device Identifier: 10886982274021
• UDI-Public: (01)10886982274021
• Combination Product (Y/N): N
• Initial Reporter Country: CO
• PMA/510(K) Number: K111437
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Physician
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 03.404.022S
• Device Lot Number: 5717P03
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 10/10/2023
• Supplement Date Received by Manufacturer: 11/13/2023
• Initial Report FDA Received Date: 10/31/2023
• Supplement Report FDA Received Date: 11/21/2023
• Was Device Evaluated by Manufacturer? (Y/N): Device Not Returned to Manufacturer
• Date Device Manufactured: 05/06/2023
• Is the Device Labeled for Single Use? (Y/N): Yes
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: REAMER HEAD F/RIA 2 Ø13.5; RIA 2 BONE HARVESTING KIT L520
• Patient Sex: Unknown