MAUDE Adverse Event Report: DEPUY FRANCE SAS - 3003895575 GLEN RESURFACING REAMER D27 MM; EXTREMITY INSTRUMENTS : REAMERS

Catalog Number	230788027
Medical Device Problem Code	Failure to Cut (2587)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	10/24/2023
Type of Reportable Event	Malfunction
Event or Problem Description
During reaming of the patients glenoid, it became apparent that the glenoid reamer was not sharp and surgeon had to use a different reamer in order for the implant to sit on the bleeding bone.There was no delay in surgery or any patient safety concerns.The reamer simply needs to be replaced.
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Additional Manufacturer Narrative
Product complaint # (b)(4).Investigation summary: during reaming of the patients glenoid, it became apparent that the glenoid reamer was not sharp and surgeon had to use a different reamer in order for the implant to sit on the bleeding bone.There was no delay in surgery or any patient safety concerns.The reamer simply needs to be replaced.The device associated with this report was returned to depuy synthes for evaluation.Visual analysis of the device found blunting, rounding of cutting edges.It is not unreasonable that the condition identified in visual analysis would contribute to a dull condition.Therefore we are able to confirm dullness with damage observed, as this kind of evidence indicates repeated use of the device.The lifecycle requirements of the device are event related and depend on the use in clinical practice, the device must be properly inspected prior to each surgical use.Refer to the device/country specific ifu for information related to end of life, reprocessing instructions, and inspection procedures.A dimensional inspection was not performed since it was not applicable to the complaint condition.The overall complaint was confirmed as the observed condition of glen resurfacing reamer d27 mm would have contributed to the complained issue.Based on the investigation findings, the potential cause is traced to end of life, and it has been determined that no corrective and/or preventative action is required.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot: the product investigation found no evidence suspecting an error in the manufacturing or material that would be a contributing factor in the reported allegation(s).A manufacturing records evaluation (mre) was not performed.

• Brand Name: GLEN RESURFACING REAMER D27 MM
• Common Device Name: EXTREMITY INSTRUMENTS : REAMERS
• Manufacturer (Section D): DEPUY FRANCE SAS - 3003895575; 7 allee irene joliot-curie; b.p. 256; saint priest cedex 69801 ; FR 69801
• Manufacturer (Section G): DEPUY ORTHOPAEDICS, INC. 1818910; 700 orthopaedic dr.; warsaw IN 46581 0988
• Manufacturer Contact: kate karberg ; 700 orthopaedic dr.; warsaw, IN 46581-0988 ; 3035526892
• MDR Report Key: 18050904
• Report Number: 1818910-2023-22261
• Device Sequence Number: 8254813
• Product Code: HTO
• UDI-Device Identifier: 10603295116479
• UDI-Public: 10603295116479
• Combination Product (Y/N): N
• Initial Reporter Country: AS
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup
• Report Date (Section B): 11/01/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 230788027
• Device Lot Number: 5201848
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 10/24/2023
• Supplement Date Received by Manufacturer: 01/10/2024; 01/12/2024
• Initial Report FDA Received Date: 11/01/2023
• Supplement Report FDA Received Date: 01/11/2024; 01/15/2024
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 08/20/2008
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Patient Sex: Female