|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: d9: complainant part is not expected to be returned for manufacturer review/investigation.E3: initial reporter is a synthes employee.H3, h4, h6: without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Device report from australia reports an event as follows: it was reported that on (b)(6) 2023, while the scrub nurse was loading 2.4mm non-locking screws for the case, incorrect screw lengths were found in the caddies.Additionally, one screw head appeared stripped/damaged.There was no surgical delay, the procedure was completed successfully with no adverse patient impact.This report is for a 2.4mm ti matrixmandible screw self-tapping 12mm.This is report 1 of 1 for (b)(4).
|