MAUDE Adverse Event Report: MEDOS INTERNATIONAL SÃ RL CH EXPEDIUM SPINE SYSTEM SI POLYAXIAL SCREW 5.5 X 7 X 50MM; ORTHOSIS, SPINAL PEDICLE FIXATION

Catalog Number	179712750
Medical Device Problem Code	Compatibility Problem (2960)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	11/28/2023
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: d2: additional procodes: osh, mnh, kwp, kwq, nkb.D9: complainant part is expected to be returned for manufacturer review/investigation, but has yet to be received.H3, h4, h6: without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
Device report from chile reports an event as follows: it was reported that on (b)(6) 2023, while placing the bar on the right side, due to a damaged screw the bar did not descend as appropriate.The surgeon removed the screw from the patient and placed a new one.There was no adverse patient impact.This report is for an expedium spine system si polyaxial screw 5.5 x 7 x 50mm.This is report 1 of 2 for (b)(4).
Event or Problem Description
There was a surgical delay.The surgery was completed successfully.The patient is in good condition.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.The product was not returned to depuy synthes, however photos were provided for review.The photo investigation found the si polyaxl screw 7 x 50mm damaged and stripped from the head, it is reasonable to confirm the inability to assemble based on the observed condition.The observed condition of the device was consistent with a component failure that may have been caused by exposure to unintended forces.As the device was not returned, an as-received condition could not be assessed, and a dimensional inspection and document/specification review were not completed.The overall complaint was confirmed.As the observed condition of the [si polyaxl screw 7 x 50mm] would contribute to the complained device issue.  based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the complaint condition.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history: the device lot number is unknown, therefore a device history review could not be performed. if the lot/serial number becomes available, the record will be re-assessed device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.D10.Concomitant med products- added d10.Therapy dates- added.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: EXPEDIUM SPINE SYSTEM SI POLYAXIAL SCREW 5.5 X 7 X 50MM
• Common Device Name: ORTHOSIS, SPINAL PEDICLE FIXATION
• Manufacturer (Section D): MEDOS INTERNATIONAL SÃ RL CH; chemin-blanc 38; le locle 02400 ; SZ 02400
• Manufacturer (Section G): MEDOS INT SPINE; chemin blanc 38; le locle ; SZ
• Manufacturer Contact: kate karberg ; chemin-blanc 38; le locle ; SZ ; 3035526892
• MDR Report Key: 18366873
• Report Number: 1526439-2023-02575
• Device Sequence Number: 7743574
• Product Code: MNI
• UDI-Device Identifier: 10705034067919
• UDI-Public: (01)10705034067919
• Combination Product (Y/N): N
• Initial Reporter Country: CI
• PMA/510(K) Number: K200245
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 179712750
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 11/28/2023
• Supplement Date Received by Manufacturer: 12/26/2023; 01/30/2024; 02/09/2024
• Initial Report FDA Received Date: 12/20/2023
• Supplement Report FDA Received Date: 01/16/2024; 02/09/2024; 02/22/2024
• Was Device Evaluated by Manufacturer? (Y/N): Device Not Returned to Manufacturer
• Is the Device Labeled for Single Use? (Y/N): Yes
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: SI POLYAXL SCREW 7 X 50MM; SINGLE-INNER SETSCREW
• Patient Sex: Unknown