MAUDE Adverse Event Report: BIOMET 3I 3I T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT 4 X 11.5MM; DENTAL IMPLANT

Catalog Number	BOSS411
Medical Device Problem Code	Adverse Event Without Identified Device or Use Problem (2993)
Health Effect - Clinical Code	Pain (1994)
Date of Event	11/26/2023
Type of Reportable Event	Serious Injury
Additional Manufacturer Narrative
Zimvie complaint number (b)(4).A1: patient identifier unknown / not provided a4: patient weight unknown / not provided d6: implant date unknown / not provided.
Event or Problem Description
It was reported that the implant at tooth site 45 was removed due to pain.
Additional Manufacturer Narrative
Zimvie complaint number (b)(4).The following fields have been updated: b4: date of this report.B5: describe event or problem.D4: additional device information.D9: device availability.G3: date received by manufacturer.G6: type of report.H1: type of reportable event.H2: follow up type.H3: device evaluated by manufacturer.H4: device manufacturer date.H6: adverse event problem.H10: additional narrative.Zimvie received one (1) boss411, (3i t3 non-platform switched parallel walled implant 4 x 11.5mm) for evaluation.Visual evaluation was performed, slight wear from usage.No damage identified or signs of malfunction.Measurements match drawing.Cal002c159 due: 30 may 2024.Dhr review was completed for the subject lot number 2022110819.No deviations or non-conformances, which could have caused or contributed to the reported event, were noted as part of the dhr.Complaint history review was performed for the reported lot number 2022110819 for similar events and no other complaint was identified.Review completed utilizing keywords: dental : medical : pain based on the investigation and risk management file review, the most likely root cause determined from the investigation was inadequate treatment planning.Therefore, based on the available information, a device malfunction did not occur.No further investigation or immediate capa / hhe/d escalation is required, as the complaint investigation did not confirm the products were nonconforming at the time of distribution, and no new failure mode, harm, or hazardous situation was identified through the investigation performed.At this time, the complaint investigation has been completed and the record will be closed.If additional information is received, the record will be re-opened for further evaluation.
Event or Problem Description
No further event information is available at the time of this report.

• Brand Name: 3I T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT 4 X 11.5MM
• Common Device Name: DENTAL IMPLANT
• Manufacturer (Section D): BIOMET 3I; 4555 riverside drive; palm beach gardens FL 33410
• Manufacturer (Section G): BIOMET 3I; 4555 riverside drive; palm beach gardens FL 33410
• Manufacturer Contact: carlos gordian-arroyo ; 4555 riverside drive; palm beach gardens, FL 33410 ; 5619713230
• MDR Report Key: 18446902
• Report Number: 0001038806-2024-02576
• Device Sequence Number: 7033574
• Product Code: DZE
• UDI-Device Identifier: 00844868028826
• UDI-Public: (01)00844868028826(17)271220(10)2022110819
• Combination Product (Y/N): N
• Initial Reporter Country: FR
• PMA/510(K) Number: K122300
• Exemption Number: 5645646
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Explanted Year: 2023
• Serviced by Third Party (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional
• Initial Reporter Occupation: Dentist
• Type of Report: Initial,Followup
• Report Date (Section B): 06/13/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Operator of Device: Lay User/Patient
• Device Catalogue Number: BOSS411
• Device Lot Number: 2022110819
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 12/10/2023
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: Not provided
• Supplement Date Received by Manufacturer: Not provided
• Initial Report FDA Received Date: 01/04/2024
• Supplement Report FDA Received Date: 06/14/2024
• Was Device Evaluated by Manufacturer? (Y/N): Device Not Returned to Manufacturer
• Date Device Manufactured: 12/19/2022
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Patient Age: 52 YR
• Patient Sex: Male
• Patient Ethnicity: Non Hispanic