MAUDE Adverse Event Report: AIZU OLYMPUS CO., LTD. EVIS EXERA II BRONCHOVIDEOSCOPE

Model Number	BF-P180
Medical Device Problem Code	No Display/Image (1183)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/02/2024
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
The device was returned to olympus for evaluation and the evaluation found the charged coupled device was bad.There was no data from the identification chip.The distal end plastic cover had a minor dent, chip and scratch.The bending section cover was floppy (soft), the glue was lifting and had scratches.The bending section failed the electrical continuity test.The insertion tube was dented and had a failed ring gauge.Additionally, the evaluation found low angulation.The investigation is ongoing.A supplemental report will be submitted upon completion of the investigation or if any additional information is provided by the user facility.
Event or Problem Description
The customer reported to olympus, the bronchovideoscope had no image.The issue was found during preparation for use for an unspecified procedure.The procedure was completed with a different device.There was no delay in the procedure.There were no reports of patient harm.
Additional Manufacturer Narrative
This supplemental report is being submitted to provide the results of the legal manufacturer's final investigation.A review of device history record and historical complaints analysis was conducted and no deviations that could have caused or contributed to the reported issue was identified.Based on the results of the investigation, it is likely that the charged coupled device cable was under pressure and on the verge of breaking, which led to the image issue.The event can be detected/prevented by following the instructions for use which state: important information ¿ please read before use warnings and cautions: caution ·turn the video system center on only when the videoscope cable is connected to both the video system center and the electrical connector on the endoscope.In particular, confirm that the video system center is off before connecting or disconnecting the videoscope cable from the electrical connector on the endoscope.Failure to do so can result in equipment damage, including destruction of the ccd.Precaution for disappeared or frozen endoscopic image; warning.·follow the precautions given below when handling the instrument.Otherwise, the endoscopic image may disappear unexpectedly, or the frozen image may not be restored during the examination.3.6 inspection of the endoscopic system inspection of the endoscopic image 3.While observing the palm of your hand, confirm that the wli and nbi endoscopic image is free from noise, blur, fog, or other irregularities.4.Angulate the endoscope and confirm that the wli and nbi endoscopic image does not momentarily disappear or display any other irregularities.Chapter 5 troubleshooting if the endoscope is visibly damaged, does not function as expected, or is found to have irregularities during the inspection described in chapter 3, ¿preparation and inspection¿, do not use the endoscope.Contact olympus.Some problems that appear to be malfunctions may be correctable by referring to section 5.1, ¿troubleshooting guide¿.If the problem cannot be resolved by the described remedial action, stop using the endoscope and send it to olympus for repair.Olympus does not repair accessory parts.If an accessory part becomes damaged, contact olympus to purchase a replacement.Olympus will continue to monitor field performance for this device.

• Brand Name: EVIS EXERA II BRONCHOVIDEOSCOPE
• Common Device Name: BRONCHOVIDEOSCOPE
• Manufacturer (Section D): AIZU OLYMPUS CO., LTD.; 3-1-1 niiderakita; aizuwakamatsu-shi, fukushima 965-8 520; JA 965-8520
• Manufacturer (Section G): AIZU OLYMPUS CO., LTD.; 3-1-1 niiderakita; aizuwakamatsu-shi, fukushima
• Manufacturer Contact: todd brill ; 800 west park drive; westborough, MA 01581 ; 5082077661
• MDR Report Key: 18563318
• Report Number: 9610595-2024-01431
• Device Sequence Number: 8124807
• Product Code: EOQ
• UDI-Device Identifier: 04953170308192
• UDI-Public: 04953170308192
• Combination Product (Y/N): N
• Initial Reporter State: OR
• Initial Reporter Country: US
• PMA/510(K) Number: K061313
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Health Professional,User Facility
• Initial Reporter Occupation: Biomedical Engineer
• Type of Report: Initial,Followup
• Report Date (Section B): 02/22/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: BF-P180
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 01/04/2024
• Is the Reporter a Health Professional?: Yes
• Was the Report Sent to FDA?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 01/03/2024
• Supplement Date Received by Manufacturer: 02/15/2024
• Initial Report FDA Received Date: 01/23/2024
• Supplement Report FDA Received Date: 02/22/2024
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 05/11/2018
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Reuse
• Patient Sequence Number: 1
• Patient Sex: Unknown