MAUDE Adverse Event Report: DEPUY INTERNATIONAL LTD - 8010379 HP EM TIBIAL JIG SPIKED UPROD; KNEE INSTRUMENT : ALIGNMENT DEVICES

Catalog Number	950501230
Medical Device Problem Code	Material Deformation (2976)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	02/02/2024
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported that the spikes on the tibial jig were bent.Surgical delay was unknown.
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Additional Manufacturer Narrative
Product complaint # (b)(4).Investigation summary : an analysis of the product could not be performed since a physical sample was not received for evaluation.As part of our company quality system process, all devices are manufactured, inspected, and distributed to approved specifications.Additional complaint information monitoring for potential safety signals will be conducted through complaint trending as part of the post-market surveillance.However, if the product is received at a later date, the investigation will be updated as applicable.
Additional Manufacturer Narrative
Product complaint (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.Added: d4, d9, h4.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Additional Manufacturer Narrative
Product complaint # (b)(4).Investigation summary: it was reported that the spikes on the tibial jig were bent and the springs on the spacer blocks were bent as well.Surgical delay was unknown.The product was returned to depuy synthes for evaluation.Visual inspection revealed one spike of the tibial jig assembly bent.Additionally, device exhibits an overall worn appearance.Bent condition can be consistent with a component failure that was caused by exposure to unintended forces in a prying motion or by improper handling or care.However, based on the age of the device (around 14 years), potential cause can be traced to an end of life problem.The lifecycle requirements of the device are event related and depend on the use and inspection of the device in clinical practice.As the device can be damaged on the first or 100th use, the device must be properly inspected prior to each surgical use.Refer to the device/country specific ifu for information related to end of life, reprocessing instructions, and inspection procedures.A dimensional inspection was unable to be performed due to the post-manufacturing damage.A functional test was unable to be performed due to the post-manufacturing damage.The overall complaint was confirmed as the observed condition of the hp em tibial jig spiked uprod would contribute to the complained device issue.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the reported complaint condition.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot: a device history record (dhr) review or manufacturing records evaluation (mre) was not possible because the date code a0609 provided is not a valid finished goods lot number.

• Brand Name: HP EM TIBIAL JIG SPIKED UPROD
• Common Device Name: KNEE INSTRUMENT : ALIGNMENT DEVICES
• Manufacturer (Section D): DEPUY INTERNATIONAL LTD - 8010379; st. anthony's road; leeds LS11 8DT; UK LS11 8DT
• Manufacturer (Section G): DEPUY ORTHOPAEDICS, INC. 1818910; 700 orthopaedic dr.; warsaw IN 46581 0988
• Manufacturer Contact: kate karberg ; 700 orthopaedic dr.; warsaw, IN 46581-0988 ; 3035526892
• MDR Report Key: 18660197
• Report Number: 1818910-2024-02610
• Device Sequence Number: 7317025
• Product Code: HTZ
• UDI-Device Identifier: 10603295225355
• UDI-Public: (01)10603295225355(10)A0609
• Combination Product (Y/N): N
• Initial Reporter State: NC
• Initial Reporter Country: US
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup,Followup
• Report Date (Section B): 02/07/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 950501230
• Device Lot Number: A0609
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 02/02/2024
• Supplement Date Received by Manufacturer: 02/21/2024; 04/29/2024; 08/19/2024
• Initial Report FDA Received Date: 02/07/2024
• Supplement Report FDA Received Date: 02/22/2024; 05/01/2024; 08/22/2024
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 06/15/2009
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Patient Age: 53 YR
• Patient Sex: Female