MAUDE Adverse Event Report: ETHICON INC. VCL CT BRD VIO 18IN 4-0 S/A C-3; SUTURE, ABSORBABLE, SYNTHETIC

Catalog Number	J386H
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/01/2024
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Product complaint # (b)(4).H6 component code: g07002 - device not returned.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon inc, or its employees that the report constitutes an admission that the product, ethicon inc or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.A manufacturing record evaluation was performed for the finished device lot, and no non-conformances were identified.Events reported via: mwr-29012024-0001561237, mwr-29012024-0001561238, mwr-29012024-0001561239.
Event or Problem Description
It was reported that a patient underwent an unknown procedure in 2024 and suture was used.During the procedure, the suture broke during surgery.No adverse patient consequences were reported.Additional information was requested.
Additional Manufacturer Narrative
Product complaint # pc-(b)(4).Date sent to the fda: 4/16/2024 h6 component code: g07002 pending evaluation of returned device additional information: d9, h3, h6 a device has been received, however it has not yet been evaluated.Any further information derived from the evaluation will be submitted in a supplemental 3500a form.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon inc, or its employees that the report constitutes an admission that the product, ethicon inc or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Additional Manufacturer Narrative
Product complaint # (b)(4).Date sent to the fda: 5/23/2024.Additional information: investigational summary: the product received for analysis was identified as product code j386h.Visual inspection and metallurgical analysis were performed on the returned product.The samples were separated in the packing and are pictured with components found in the same group.Group a contained 2 pieces, likely composing a single needle.The red arrows in the pictures indicate that areas that were examined for this evaluation.The fracture was located at the suture attachment.The fracture surfaces were examined in multiple locations to determine the fracture mode.A scanning electron microscope was used to examine the fracture surfaces and surrounding area of the needles.The fracture was located at the suture attachment.The evaluation of the sample revealed the fractures was predominantly composed of microvoid coalescence, which is evidence of a ductile overload failure.This was ductile fracture.The evidence of this examination indicates that the breakage occurred at the attachment area of the needle during use due to tensile overload.There is no evidence of any material flaw or defect that would cause premature failure.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.Additional h3 investigational summary: the product was returned to ethicon for evaluation.The returned sample determined that it was received, one suture piece with a needle piece still and one suture piece that pertain to product code j386h.Upon visual inspection, of the returned sample, the suture pieces were examined, and the extremes of the suture were noted to be cut probably caused by a surgical instrument.In addition, body fluids were noted on the strands.The product code j386h contains an absorbable suture.As the sample was received open, the time of exposure to the environment cannot be determined.As per the condition of the returned sample, the functional test could not be performed.As part of the quality process, all devices are manufactured, inspected, and released to approved specifications.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon inc, or its employees that the report constitutes an admission that the product, ethicon inc or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.

• Brand Name: VCL CT BRD VIO 18IN 4-0 S/A C-3
• Common Device Name: SUTURE, ABSORBABLE, SYNTHETIC
• Manufacturer (Section D): ETHICON INC.; 1000 route 202; raritan NJ 08869
• Manufacturer (Section G): ETHICON INC.-JUAREZ; calle durango #2751; ciudad juarez 32575 ; MX 32575
• Manufacturer Contact: elba bello ; 1000 route 202; raritan, NJ 08869 ; 9083863534
• MDR Report Key: 18675852
• Report Number: 2210968-2024-01183
• Device Sequence Number: 20389164
• Product Code: GAM
• UDI-Device Identifier: 10705031039490
• UDI-Public: 10705031039490
• Combination Product (Y/N): N
• Initial Reporter Country: TW
• PMA/510(K) Number: K022269
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup
• Report Date (Section B): 04/16/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: J386H
• Device Lot Number: TDMDRU
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 01/22/2024
• Supplement Date Received by Manufacturer: 04/01/2024; 04/30/2024
• Initial Report FDA Received Date: 02/09/2024
• Supplement Report FDA Received Date: 04/16/2024; 05/23/2024
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 04/12/2023
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown