MAUDE Adverse Event Report: MENTOR TEXAS MENTOR MEMORYGEL BOOST BREAST IMPLANT; PROSTHESIS, BREAST, NONINFLATABLE, INTERNAL, SILICONE GEL-FILLED

Catalog Number	SHPB635
Medical Device Problem Codes	Material Rupture (1546); Use of Device Problem (1670)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	02/06/2024
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Since the device has not been returned for analysis, no product failure analysis can be conducted, and no determination of possible contributing factors can be made.As such, the investigation will be closed.If the complaint device is received in the future, the investigation will be reopened and conducted as appropriate.A manufacturing record evaluation (mre) was performed, and no anomalies were found related to this complaint.In addition, the mre verifies that the device was manufactured in accordance with documented specification and procedures.Reason for device explant and/or reoperation: n/a.Mentor is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which mentor has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, mentor, or its employees that the report constitutes an admission that the device, mentor, or its employees caused or contributed to the potential event described in this report.Manufacturer¿s reference number: (b)(4).
Event or Problem Description
It was reported that a 635cc mentor memorygel boost breast implant being used in a breast reconstruction revision was found to have a large crease across the shell during the operation.The surgeon was using breast prosthesis as a sizer and inserting the breast prosthesis with force into the breast pocket.The breast prosthesis was pushed from side to side into the incision.The retractor was also in the incision when inserting the breast prothesis.The surgeon noticed upon removing the breast prosthesis from the pocket that it was possibly fractured on the inside.There was a large crease running across the shell, however, the shell was intact, and no rupture was visible.No adverse event was experienced by the patient.The surgeon used backup devices, and there were no reported patient consequences or procedural delays.

• Brand Name: MENTOR MEMORYGEL BOOST BREAST IMPLANT
• Common Device Name: PROSTHESIS, BREAST, NONINFLATABLE, INTERNAL, SILICONE GEL-FILLED
• Manufacturer (Section D): MENTOR TEXAS; 3041 skyway circle north; irving TX 75038
• Manufacturer (Section G): MENTOR TEXAS; 3041 skyway circle north; irving TX 75038
• Manufacturer Contact: kate karberg ; 3041 skyway circle north; irving, TX 75038 ; 3035526892
• MDR Report Key: 18842469
• Report Number: 1645337-2024-02746
• Device Sequence Number: 12847963
• Product Code: FTR
• UDI-Device Identifier: 00081317027126
• UDI-Public: 00081317027126
• Combination Product (Y/N): N
• Initial Reporter Country: US
• PMA/510(K) Number: P030053
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: SHPB635
• Device Lot Number: 9845081
• Was Device Available for Evaluation?: No
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 02/07/2024
• Initial Report FDA Received Date: 03/05/2024
• Was Device Evaluated by Manufacturer? (Y/N): No
• Date Device Manufactured: 01/09/2023
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Female