| Model Number |
2.4 X 20MM VAL SCREW, TI |
| Medical Device Problem Code |
Failure to Advance (2524)
|
| Health Effect - Clinical Code |
No Clinical Signs, Symptoms or Conditions (4582)
|
| Date of Event |
02/21/2024
|
|
Type of Reportable Event
|
Malfunction
|
|
Additional Manufacturer Narrative
|
|
The contribution of the device to the reported event could not be determined as the device was not returned for evaluation.Investigation is in process.A follow-up report will be provided upon availability of additional information.
|
| |
|
Event or Problem Description
|
|
On 02/23/2024, it was reported by a sales representative via phone that an ar-8724v-20 low profile va locking screw went through the plate, and (3) ar-8724v-18 low profile va locking screws would not lock into the plate.This occurred during a distal radius procedure on (b)(6) 2024, where the plate was still used in the case however, a screw was not placed in the area where the ar-8724v-20 went through.The case was completed using screws from a mini frag set.There was no harm to the patient.
|
| |
|
Additional Manufacturer Narrative
|
|
Additional information: g3, h3, h6.Based on visual analysis of the ar-8724v-20, arthrex was able to conclude a most likely cause.The most likely cause for the reported failure can be attributed to user error of the device due to over-torquing the ar-8724v-20 screw when inserting into the plate and/or hard bone.
|
| |
|
Search Alerts/Recalls
|