MAUDE Adverse Event Report: COVIDIEN LP LLC NORTH HAVEN ENDO GIA; STAPLE, IMPLANTABLE

Model Number	030456
Medical Device Problem Code	Failure to Fire (2610)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	03/07/2024
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
D10 concomitant product: egiaustnd endogia ultra univ std stap (lot#: p2e0665s); 030459 endo gia r/or 60 4.8mm (lot#: t2k001x); egiaustnd endogia ultra univ std stap (lot#: p2e0665s) medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
Event or Problem Description
According to the reporter, during a laparoscopic lobectomy, the surgeon was unable to squeeze the handle; the device did not fire.The issue occurred on two reload and two handles.A new device (handle and reload) was used to resolve the issue.No patient injury.
Additional Manufacturer Narrative
Evaluation summary: medtronic conducted an investigation based upon all information received.The device was available for evaluation.Visual inspection noted the loading unit was partially fired to the 2cm cut line and the clamping mechanism was deformed.It was reported that the device did not fire.The reported issue was confirmed.The product analysis noted evidence that the device was not used as intended.This issue may occur if: application over tissue that is beyond the recommended thickness range; application with an obstacle incorporated in the jaws.In any of these circumstances, it will become increasingly difficult to actuate the firing handle and the instrument return knobs will be difficult to retract.In addition, staples may not form properly and tissue may not be fully transected.The manufacturing records for each device are thoroughly reviewed prior to release to ensure that it meets all medtronic quality specifications.The instructions included with this device provide the following guidance: select a loading unit with the appropriate staple size for the tissue thickness.Overly thick or thin tissue may result in unacceptable staple formation.Always include the combined thickness of the tissue and of any staple line reinforcement material in use when choosing the proper staple cartridge.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.

• Brand Name: ENDO GIA
• Common Device Name: STAPLE, IMPLANTABLE
• Manufacturer (Section D): COVIDIEN LP LLC NORTH HAVEN; 195 mcdermott rd; north haven CT 06473
• Manufacturer (Section G): COVIDIEN LP LLC NORTH HAVEN; 195 mcdermott rd; north haven CT 06473
• Manufacturer Contact: justin ellis ; 8200 coral sea st ne; mounds view, MN 55112 ; 7635265677
• MDR Report Key: 19033729
• Report Number: 1219930-2024-01430
• Device Sequence Number: 7069334
• Product Code: GDW
• UDI-Device Identifier: 10884523002874
• UDI-Public: 10884523002874
• Combination Product (Y/N): N
• Initial Reporter Country: CH
• PMA/510(K) Number: K111825
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2024
• Device Explanted Year: 2024
• Serviced by Third Party (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 05/22/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 03/22/2026
• Device Model Number: 030456
• Device Catalogue Number: 030456
• Device Lot Number: T1C215X
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 03/07/2024
• Supplement Date Received by Manufacturer: 05/21/2024
• Initial Report FDA Received Date: 04/03/2024
• Supplement Report FDA Received Date: 05/22/2024
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 03/22/2021
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: SEE NOTE ON H11
• Patient Sex: Unknown