MAUDE Adverse Event Report: DEPUY MITEK LLC US GII QA+ #2 ETH CP-2 *EA; STAPLE, FIXATION, BONE

Catalog Number	212034
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	02/18/2024
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by mitek or its employees that the report constitutes an admission that the device, mitek, or its employees caused or contributed to the potential event described in this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.The complaint device is not being returned, it was discarded by the customer, therefore unavailable for a physical evaluation.Since the complaint device was discarded, we cannot determine a root cause for the reported failure.If additional information or the device is received in the future, we will reopen the complaint and perform the investigation as appropriate.A manufacturing record evaluation was performed for the finished device lot number and no non-conformances related to the reported complaint condition were identified.At this point in time, no corrective action is required, and no further action is warranted.However, depuy synthes mitek will continue to track any related complaints within this device family as a means of monitoring the extent with which this complaint is observed in the field.
Event or Problem Description
It was reported by the health authority in the united kingdom that during an unspecified surgical procedure the two (x2) gii qa+ #2 eth cp-2 devices were being used when both devices snapped.It was reported that this occurred with the patient on the table, after the anchoring was done and whilst tying the suture.The surgeon was unable to remove the anchored suture, it was changed and reinforced with a like device in order to complete the procedure.There was no delay in the procedure reported.There were no adverse patient consequences reported.No additional information was provided.This is report 1 of 2 for (b)(4).
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by mitek or its employees that the report constitutes an admission that the device, mitek, or its employees caused or contributed to the potential event described in this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: as of this date, the device has not been returned for evaluation; therefore, the reported condition cannot be confirmed and/or duplicated.Nca# assigned for this event by the health authority in the uk (mhra): 2024/004/010/501/003.H4: the device date of manufacture is unknown at this time.Udi: (b)(4).

• Common Device Name: STAPLE, FIXATION, BONE
• Manufacturer (Section D): DEPUY MITEK LLC US; 325 paramount drive; raynham MA 02767
• Manufacturer (Section G): DEPUY MITEK LLC US; 325 paramount drive; raynham MA 02767
• Manufacturer Contact: kate karberg ; 325 paramount drive; raynham, MA 02767 ; 3035526892
• MDR Report Key: 19165326
• Report Number: 1221934-2024-01232
• Device Sequence Number: 15299296
• Product Code: JDR
• UDI-Device Identifier: 10886705001828
• UDI-Public: 10886705001828
• Combination Product (Y/N): N
• Initial Reporter Country: UK
• PMA/510(K) Number: K915889
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Other,Foreign
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 04/22/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 212034
• Device Lot Number: 220L032
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 04/11/2024
• Supplement Date Received by Manufacturer: 04/30/2024
• Initial Report FDA Received Date: 04/23/2024
• Supplement Report FDA Received Date: 05/01/2024
• Was Device Evaluated by Manufacturer? (Y/N): Device Not Returned to Manufacturer
• Date Device Manufactured: 11/09/2023
• Is the Device Labeled for Single Use? (Y/N): Yes
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown