|
EXACTECH, INC. LOGIC TIBIA PS MOD INSRT SZ 5 11MM; PROSTHESIS, KNEE, PATELLOFEMOROTIBIAL, SEMI-CONSTRAINED, CEMENTED, POLYMER/METAL
|
Back to Search Results |
|
| Catalog Number |
02-012-35-5011 |
| Medical Device Problem Codes |
Unstable (1667); Naturally Worn (2988)
|
| Health Effect - Clinical Codes |
Failure of Implant (1924); Joint Laxity (4526); Implant Pain (4561); Swelling/ Edema (4577)
|
| Date of Event |
12/19/2022
|
|
Type of Reportable Event
|
Serious Injury
|
|
Event or Problem Description
|
|
It was reported via legal documentation that approximately 111 months after a right total knee replacement procedure, the patient underwent a revision procedure to address prosthesis wear, increasing pain, swelling, and instability.Upon the revision of the optetrak logic device, the plaintiff's surgeon observed signs of wear and oxidation in the tibial insert.No further issues or complications were reported.No additional information is available.
|
| |
|
Additional Manufacturer Narrative
|
|
D10: concomitant devices: 2505533 (b)(6) - logic femoral ps cem right sz 5.2430547 (b)(6) - lgc tibial fit tray cem sz 5f / 5t.2394453 (b)(6) - three peg patella 38mm.2706793 (b)(6) - 2pk, schanz pin 4mmx130mmx40mm thrd.04024013022 a10007 - gps knee implant kit.The product associated with the reported event is within the scope of recall z-0021-2022; however, there is insufficient information to evaluate whether the subject issue of the recall was the cause or contributor to the reported event.The device was not returned for evaluation and no medical or other records containing treatment information or patient information have been received; therefore, the reported event cannot be confirmed, nor can the circumstances or potential causes or contributors to the alleged event be evaluated.Should additional material information become available that permits more analysis or conclusions, a supplemental report will be filed accordingly.
|
| |
|
Additional Manufacturer Narrative
|
|
The reason for the revision reported cannot be confirmed from the information provided but may be the result of prosthesis wear, instability and/or due to inclusion of the polyethylene in the packaging recall.Potential contributions of user and patient-related considerations to the event could not be assessed as the devices were not available for evaluation and images and radiographs were not provided.H6: corrected medical device clinical codes.
|
| |
|
Search Alerts/Recalls
|
|
|