MAUDE Adverse Event Report: EIT EMERGING IMPLANT TECHNOLOGIES GMBH IMPLANT INSERTER SH CONNECTION; INTERVERTEBRAL FUSION DEVICE WITH BONE GRAFT, LUMBAR

Catalog Number	TFT30101
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	05/24/2024
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: d9: complainant part is expected to be returned for manufacturer review/investigation but has yet to be received.E3: reporter is a j&j sales representative.H3, h6: the investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
It was reported on (b)(6) 2024 that during the attachment of the conduit handle, the inner shaft broke on the transition from the threaded to the non-threaded part.One part of the inner shaft remained stuck on the handle.No fragments were generated.There was no surgical delay.The second handle that is part of the set was used and procedure was completed successfully.There was no patient consequence.This report is for one (1) implant inserter sh connection this is report 1 of 2 for complaint (b)(4).
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.Additional narrative: d4 h3, h6: the device was received, the investigation is in progress, no conclusion could be drawn at the time of filing this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.The product was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned device.Visual analysis of the returned sample revealed that the implant inserter pin sh of the implant inserter sh connection was broken at the tip of the device, the broken part of the device was not returned for investigation.A dimensional inspection was not performed due to the post-manufacturing damage.The observed condition of the device was consistent with a random component failure that may have been caused by exposure to unintended forces.The overall complaint was [confirmed as the observed condition of the implant inserter sh connection would contribute to the complained device issue.There is no indication that a design or manufacturing issue has caused the complaint condition.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Device history review (dhr): part # tft30101; lot # e21di0137; supplier: (b)(4).Batch1: lot qty of (b)(4) units were released on 30 mar 2022 with no discrepancies.No ncrs were generated during production.The ri identified no issues during the manufacturing and release of this device that could have contributed to the problem reported by the customer.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: IMPLANT INSERTER SH CONNECTION
• Common Device Name: INTERVERTEBRAL FUSION DEVICE WITH BONE GRAFT, LUMBAR
• Manufacturer (Section D): EIT EMERGING IMPLANT TECHNOLOGIES GMBH; eisenbahnstrasse 84; wurmlingen D-785 73
• Manufacturer (Section G): EIT EMERGING IMPLANT TECHNOLOGIES GMBH; eisenbahnstrasse 84; wurmlingen D-785 73; GM D-78573
• Manufacturer Contact: barbara wirth ; eisenbahnstrasse 84; wurmlingen D-785-73 ; GM D-78573 ; 6103142063
• MDR Report Key: 19602064
• Report Number: 3013730328-2024-00052
• Device Sequence Number: 3315010
• Product Code: MAX
• UDI-Device Identifier: 04260557775592
• UDI-Public: (01)04260557775592(11)220330(10)E21DI0137
• Combination Product (Y/N): N
• Initial Reporter Country: PO
• PMA/510(K) Number: K172888
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: TFT30101
• Device Lot Number: E21DI0137
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 05/28/2024
• Supplement Date Received by Manufacturer: 07/11/2024; 08/21/2024
• Initial Report FDA Received Date: 06/24/2024
• Supplement Report FDA Received Date: 08/02/2024; 08/22/2024
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 03/30/2022
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: UNKNOWN HANDLES
• Patient Sex: Unknown