MAUDE Adverse Event Report: ALCON RESEARCH, LLC - IRVINE TECHNOLOGY CENTER EDGEPLUS VALVED ENTRY SYSTEM; CANNULA, TROCAR, OPHTHALMIC

Catalog Number	8065751586
Medical Device Problem Code	Dull, Blunt (2407)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	05/17/2024
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Investigation including root cause analysis is in progress.A supplemental mdr will be filed as necessary in accordance with 21 cfr 803.56 when additional reportable information becomes available.A sample is available that has not yet been received at manufacturing for evaluation.The manufacturer internal reference number is: (b)(4).
Event or Problem Description
A physician reported that during cataract vitrectomy combination surgery, an ophthalmic trocar could not be cutting.The surgery was completed after replacing the product with another one.There were no patient impact reported.
Additional Manufacturer Narrative
Two opened trocar assemblies, in a smpt, in a pouch were received for the report of trocar could not cut.Samples were visually inspected and found to be nonconforming.For both samples, damaged blade tip/tip was bent and damaged cutting edge.Penetration testing could not be performed due to the damage of the samples.A review of the device history record traceable to the reported lot number, indicates that the reported product was processed and released according to the reported product¿s acceptance criteria.The exact root cause could not be determined from the investigation performed.The damage to the returned samples is consistent with damage that can occur when the blade contacts a hard surface such as the protective cap, improper handling, or contact with another instrument during surgery or set-up.The damage seen on the returned complaint sample could have contributed to the customer's reported issue of trocar could not cut.The exact root cause for this complaint is unknown, therefore, specific action with regards to this complaint cannot be taken.All trocar blades are 100% inspected.Any nonconformances, such as damaged tip and damaged cutting edge on the returned sample, is removed from the lot and scrapped.Complaints are reviewed and monitored at regular intervals for any significant adverse trends.No adverse trends have been observed associated with the reported product and event.No further actions are required.The manufacturer internal reference number is: (b)(4).

• Brand Name: EDGEPLUS VALVED ENTRY SYSTEM
• Common Device Name: CANNULA, TROCAR, OPHTHALMIC
• Manufacturer (Section D): ALCON RESEARCH, LLC - IRVINE TECHNOLOGY CENTER; 15800 alton parkway; irvine CA 92618
• Manufacturer (Section G): ALCON RESEARCH, LLC - IRVINE TECHNOLOGY CENTER; 15800 alton parkway; irvine CA 92618
• Manufacturer Contact: jonathan schlech ; 6201 south freeway; mail stop ab2-6; fort worth, TX 76134 ; 8007579780
• MDR Report Key: 19642355
• Report Number: 2028159-2024-00947
• Device Sequence Number: 15605967
• Product Code: NGY
• UDI-Device Identifier: 00380657515868
• UDI-Public: 00380657515868
• Combination Product (Y/N): N
• Initial Reporter Country: JA
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date (Section B): 10/02/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 12/31/2024
• Device Catalogue Number: 8065751586
• Device Lot Number: 15A0YR
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 06/05/2024
• Supplement Date Received by Manufacturer: 09/04/2024
• Initial Report FDA Received Date: 07/01/2024
• Supplement Report FDA Received Date: 10/02/2024
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 01/24/2023
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown