| Model Number |
CF-H190I |
| Medical Device Problem Code |
Failure to Clean Adequately (4048)
|
| Health Effect - Clinical Code |
No Clinical Signs, Symptoms or Conditions (4582)
|
|
Type of Reportable Event
|
Malfunction
|
|
Additional Manufacturer Narrative
|
|
The evaluation of the event is ongoing.Should additional relevant information become available, a supplemental report will be submitted.
|
| |
|
Event or Problem Description
|
|
It was observed during the device inspection, that the colonovideoscope exhibited foreign material.There were no reports of patient involvement.
|
| |
|
Additional Manufacturer Narrative
|
|
This supplemental report is being submitted to provide the results of the legal manufacturer's final investigation.Additional information added to field b5, d9, h3, h4 and h6.A review of the device history record found no deviations that could have caused or contributed to the reported issue.Based on the results of the investigation, olympus confirmed foreign material came out of the device, but the type of the material or root cause cannot be identified.There was no physical damage where the foreign material was found.Based on the results of the investigation, the cause of the foreign material that remained nozzle could not be specified and it is unknown if there are deviations from the instructions for use (ifu).The instruction manual states the detection method associated with the event in "gif/cf/pcf-190 series operation manual chapter 3 preparation and inspection", and preventative measures in "gif/cf/pcf-190 series reprocessing manual chapter 5.Reprocessing the endoscope".Olympus will continue to monitor field performance for this device.
|
| |
|
Event or Problem Description
|
|
It was observed during the device inspection, that the colonovideoscope exhibited foreign material in the nozzle.There were no reports of patient involvement.
|
| |
|
Search Alerts/Recalls
|