MAUDE Adverse Event Report: SYNTHES GMBH 2.5MM PERCUTANEOUS DRILL BIT QC/300MM/200MM CALIBRATION; BIT, DRILL

Catalog Number	324.210
Medical Device Problem Codes	Improper or Incorrect Procedure or Method (2017); Device-Device Incompatibility (2919)
Health Effect - Clinical Code	Insufficient Information (4580)
Date of Event	07/01/2024
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.D9: complainant part is not expected to be returned for manufacturer review/investigation.D10 therapy date: (b)(6) 2024.H3, h4, h6: without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
It was reported that on (b)(6) 2024, the 5 bits do not click into place on the motor's quick-lock chuck.This report involves one (1) 2.5mm percutaneous drill bit qc/300mm/200mm calibration.This is report 5 of 5 for (b)(4).
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
It was further reported by the sales representative that the user had stuck a chip on each drill bit which prevented it from clicking into place, so there was no problem with the drill bits.
Additional Manufacturer Narrative
The reporter has provided new information that indicates a user error occurred and reports no allegations against the products.The event no longer meets criteria of being a reportable event.

• Brand Name: 2.5MM PERCUTANEOUS DRILL BIT QC/300MM/200MM CALIBRATION
• Common Device Name: BIT, DRILL
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): MONUMENT; 1101 synthes avenue; monument CO 80132
• Manufacturer Contact: kate karberg ; 1302 wright lane east; west chester, PA 19380 ; 3035526892
• MDR Report Key: 19719470
• Report Number: 8030965-2024-08509
• Device Sequence Number: 8206529
• Product Code: HTW
• UDI-Device Identifier: 07611819796973
• UDI-Public: 07611819796973
• Combination Product (Y/N): N
• Initial Reporter Country: FR
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 324.210
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 07/02/2024
• Supplement Date Received by Manufacturer: 07/15/2024; 09/18/2024
• Initial Report FDA Received Date: 07/11/2024
• Supplement Report FDA Received Date: 08/07/2024; 09/24/2024
• Was Device Evaluated by Manufacturer? (Y/N): No
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: DRILL BIT Ø2.5 CALIBR L230/205 3FLUTE F/; DRILL BIT Ø2.5 CALIBR L230/205 3FLUTE F/; DRILL BIT Ø2.5 CALIBR L300 W/QUICK-COUPL; DRILL BIT Ø2.5 CALIBRATED L400 F/PERCUT-
• Patient Sex: Unknown