|
|
| Model Number |
BUR,OVAL,FLUSHCUT,12 FLUT,5.0MMX 13CM |
| Medical Device Problem Code |
Material Twisted/Bent (2981)
|
| Health Effect - Clinical Code |
No Clinical Signs, Symptoms or Conditions (4582)
|
| Date of Event |
06/20/2024
|
|
Type of Reportable Event
|
Malfunction
|
|
Event or Problem Description
|
|
It was reported that during an acj and asad cuff repair surgery the 5 mm burr bent the hood.There was no harm for patient, operator or third party.The surgery was finished successfully with a new device with the same part number.It was not necessary to switch the surgical technique or do a second surgery.
|
| |
|
Additional Manufacturer Narrative
|
|
Investigation is in process.A follow-up report will be provided upon availability of additional information.
|
| |
|
Additional Manufacturer Narrative
|
|
Additional information: d9, g3, h3, h6.Complaint allegation is confirmed.Visual evaluation reveals that the outer tube tip of the burr, oval, flushcut, 12 flute, 5.0 mm x 13 cm was bent.Functional testing was not performed due to the damage to the device.Per dfu-0215-eo f precautions 6.Do not allow the rotating portion of any device to touch any metallic object, such as a cannula or arthroscope, during use.Damage to both devices is likely.Damage to the device can range from a slight distortion or dulling of the blade/burr edge to actual fracture of the tip in vivo.If such contact does occur, inspect the tip.If there are cracks, fractures or dulling, or if there is any other reason to suspect a blade is damaged, replace it immediately.The most likely cause for the reported failure can be attributed to user error due to excessive "side-loading" on the device during use does not improve cutting performance and in extreme cases will cause irreversible damage to the device.
|
| |
|
Search Alerts/Recalls
|
|
|