MAUDE Adverse Event Report: AMO PUERTO RICO MFG. INC. TECNIS IOL; INTRAOCULAR LENS

Model Number	ZCB00
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	07/16/2024
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported that the non-preloaded johnson and johnson (jnj) intraocular lens (iol) was defective.The arms of the lens did not insert into the eye properly.The iol was fully inserted and then removed during the same procedure.There was no incision enlargement, vitrectomy, sutures or delay in procedure.There was no medical attention or medication prescribed outside the standard of care.The patient has fully recovered.No further information was provided.
Additional Manufacturer Narrative
Section a2, a4, a5, a6, patient information: declined to answer.Section d6a, if implanted, give date: not applicable as the iol was removed and replaced during the same procedure.Section d6b, if explanted, give date: not applicable as the iol was removed and replaced during the same procedure.Therefore, not explanted.Section h3, device evaluated by manufacturer: the device has not been returned for evaluation.Therefore, a failure analysis of the complaint device cannot be completed.A review of the device history record, complaint trending, and risk documentation for this device will be performed.Upon completion of the review, if there is any further relevant information a supplemental medwatch will be filed.Attempts have been made to obtain the missing information.However, to date, it has not been received.All pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.
Additional Manufacturer Narrative
Additional information.Section d9: device available for evaluation? yes section d9: date returned to manufacturer: aug 6, 2024 section h3: evaluated by manufacturer: yes device evaluation: the intraocular lens was inspected under magnification.The complaint lens was received coated in viscoelastic residue.The lens was cleaned and presented with cosmetic issues.No additional issues were identified.Based on the complaint investigation results, the product was released within specifications.Conclusion: as a result of the investigation there is no indication of a product quality deficiency, and the reported issue could not be verified.All pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.

• Brand Name: TECNIS IOL
• Common Device Name: INTRAOCULAR LENS
• Manufacturer (Section D): AMO PUERTO RICO MFG. INC.; road 402 north, anasco ind. pk; anasco PR 00610
• Manufacturer Contact: somyata nagpal ; 31 technology drive; irvine, CA 92618 ; 7142478552
• MDR Report Key: 19782083
• Report Number: 3012236936-2024-000202
• Device Sequence Number: 8110842
• Product Code: HQL
• UDI-Device Identifier: 05050474531765
• UDI-Public: (01)05050474531765(17)270221
• Combination Product (Y/N): N
• Initial Reporter State: MT
• Initial Reporter Country: US
• PMA/510(K) Number: P980040
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Health Professional,User Facility
• Initial Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date (Section B): 08/27/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: ZCB00
• Device Catalogue Number: ZCB0000225
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Was the Report Sent to FDA?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 07/16/2024
• Supplement Date Received by Manufacturer: 08/22/2024
• Initial Report FDA Received Date: 07/19/2024
• Supplement Report FDA Received Date: 08/27/2024
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 02/21/2023
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Prefer Not To Disclose