MAUDE Adverse Event Report: DRÄGERWERK AG & CO. KGAA FABIUS MRI; ANESTHESIA UNITS

Model Number	8607300
Medical Device Problem Codes	Gas Output Problem (1266); Failure to Deliver (2338); Pressure Problem (3012)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	07/12/2024
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
The investigation is still on-going.The results will be provided with a follow-up report.
Event or Problem Description
It was reported that the device failed to ventilate during a procedure and a "ventilation failure" message was displayed on the screen.No injury reported.
Additional Manufacturer Narrative
The device log file was analyzed for the reported date of event july 12th 2024.It was found that the membrane pressure (internal vacuum) being out of range has caused the reported symptom.As the log contains entries indicating a too high and too low vacuum it can be assumed that a faulty vacuum pump is root cause.In consequence, replacement of the vacuum pump is recommended.The device has reacted to the situation as specified and has shut down automatic ventilation and generated an audible and visible alarm message "ventilator failure".In this case automatic ventilation is not possible anymore and the user can switch to manual ventilation as described in the instructions for use.Monitoring is still functional.The number of similar cases, related to the same root cause, is within the expected range of the respective risk assessment and thus accepted.The field failure rate is subject to permanent monitoring by the responsible product quality board and is rated as acceptable.
Event or Problem Description
It was reported that the device failed to ventilate during a procedure and a "ventilation failure" message was displayed on the screen.No injury reported.

• Brand Name: FABIUS MRI
• Common Device Name: ANESTHESIA UNITS
• Manufacturer (Section D): DRÄGERWERK AG & CO. KGAA; moislinger allee 53-55; lübeck ; GM
• Manufacturer (Section G): DRÄGERWERK AG & CO. KGAA; moislinger allee 53-55; lübeck 23542 ; GM 23542
• Manufacturer Contact: moislinger allee 53-55; lübeck 23542 ; 4518822868
• MDR Report Key: 19881730
• Report Number: 9611500-2024-00321
• Device Sequence Number: 20605158
• Product Code: BSZ
• UDI-Device Identifier: 04048675041498
• UDI-Public: (01)04048675041498(11)210922(93)8607300-49
• Combination Product (Y/N): N
• PMA/510(K) Number: K072884
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: User Facility,Company Representative
• Initial Reporter Occupation: Biomedical Engineer
• Type of Report: Initial,Followup
• Report Date (Section B): 09/12/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: 8607300
• Was Device Available for Evaluation?: Yes
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 07/15/2024
• Supplement Date Received by Manufacturer: 09/10/2024
• Initial Report FDA Received Date: 08/01/2024
• Supplement Report FDA Received Date: 09/12/2024
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 09/22/2021
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Reuse
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: NA.; NA.
• Patient Sex: Unknown