MAUDE Adverse Event Report: MENTOR TEXAS SMO RO HIGH PRO BOOST GEL685CC; PROSTHESIS, BREAST, NONINFLATABLE, INTERNAL, SILICONE GEL-FILLED

Catalog Number	SHPB685
Medical Device Problem Codes	Adverse Event Without Identified Device or Use Problem (2993); Migration (4003)
Health Effect - Clinical Code	Capsular Contracture (1761)
Date of Event	07/23/2024
Type of Reportable Event	Serious Injury
Event or Problem Description
It was reported that a patient implanted with a 685cc mentor memorygel boost breast implant experienced capsular contracture baker grade 3 on the right side post-operatively.As a result, the patient underwent explantation on (b)(6).2024.
Additional Manufacturer Narrative
The mentor failure analysis lab has received the device for evaluation.The analysis has begun but is not complete at this time.When the investigational analysis has been completed, a supplemental report will be submitted.A manufacturing record evaluation (mre) was performed, and no anomalies were found related to this complaint.In addition, the mre verifies that the device was manufactured in accordance with documented specification and procedures.Reason for device explant and/or reoperation: h6 health effect - clinical code e2402: mentor is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which mentor has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, mentor, or its employees that the report constitutes an admission that the device, mentor, or its employees caused or contributed to the potential event described in this report.If certain information is unknown, not available or does not apply, the section/field of the form is left blank.Manufacturer¿s reference number: (b)(4).
Additional Manufacturer Narrative
Device evaluation summary: the product was returned to mentor for evaluation. mentor conducted a visual inspection of the returned device.During visual evaluation, no apparent damage or visual anomalies were observed on the smo ro high pro boost gel685cc returned device.Mentor concluded that the capsular contracture in the patient´s breast was the result of the body´s individual physiological response to the implantation of a foreign object in soft tissue.Capsular contracture is a known complication associated with these devices and is referenced in our current product insert data sheet.The american society of plastic surgeons recommends and encourages member surgeons to always submit breast implants, capsules, and effusion to pathology for examination.Implant displacement/migration may occur from improper implant sizing and/or placement, i.E., when the implant is too large or the pocket too small or when there has been inadequate preoperative assessment of stresses causing movement of the prosthesis.Implant displacement/migration is a known complication associated with these devices and is referenced in our current product insert data sheet.As part of mentor¿s quality process, all devices are manufactured, inspected, and released to approved specifications.Since no malfunction was observed during the investigation, no corrective and preventive action (capa) is required now.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.Manufacturer¿s reference number: (b)(4).

• Brand Name: SMO RO HIGH PRO BOOST GEL685CC
• Common Device Name: PROSTHESIS, BREAST, NONINFLATABLE, INTERNAL, SILICONE GEL-FILLED
• Manufacturer (Section D): MENTOR TEXAS; 3041 skyway circle north; irving TX 75038
• Manufacturer (Section G): MENTOR TEXAS; 3041 skyway circle north; irving TX 75038
• Manufacturer Contact: kate karberg ; 3041 skyway circle north; irving, TX 75038 ; 3035526892
• MDR Report Key: 20127552
• Report Number: 1645337-2024-10125
• Device Sequence Number: 15319174
• Product Code: FTR
• UDI-Device Identifier: 00081317027133
• UDI-Public: (01)00081317027133(17)280320(10)9873619
• Combination Product (Y/N): N
• Initial Reporter State: FL
• Initial Reporter Country: US
• PMA/510(K) Number: P030053
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2023
• Device Explanted Year: 2024
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Health Professional
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Operator of Device: Health Professional
• Device Catalogue Number: SHPB685
• Device Lot Number: 9873619
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 08/30/2024
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 08/27/2024
• Supplement Date Received by Manufacturer: 08/30/2024
• Initial Report FDA Received Date: 09/03/2024
• Supplement Report FDA Received Date: 09/18/2024
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 03/22/2023
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Required Intervention
• Patient Age: 36 YR
• Patient Sex: Female
• Patient Ethnicity: Hispanic