MAUDE Adverse Event Report: ETHICON INC. ULTRAPRO ADVANCED; MESH, SURGICAL, POLYMERIC

Catalog Number	UPA31015
Medical Device Problem Code	Delivered as Unsterile Product (1421)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/01/2024
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
(b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon inc, or its employees that the report constitutes an admission that the product, ethicon inc, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Attempts are being made to obtain the following information.To date no response has been provided.If further details are received at a later date a supplemental medwatch will be sent.Please clarify how the procedure was completed.Attempts are being made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.H6 component code: g07002 ¿ device not returned.
Event or Problem Description
It was reported that a patient underwent an unknown procedure on an unknown date in 2024 and mesh was used.The healthcare professional discovered larger hole in the foil pack of the mesh.No holes were detected on the outer paper box.There was no delay due to the reported event and no adverse patient consequences.Additional information has been requested.
Additional Manufacturer Narrative
(b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon inc, or its employees that the report constitutes an admission that the product, ethicon inc, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Additional information: d9, h3, h6.Additional information was requested and the following response was provided: regarding the reported "was procedure completed? no": how was the procedure completed? wrong answer.Surgery completed successfully.H3 analysis summary: the product was returned to ethicon for evaluation.One open sample was received for analysis that belongs to product code upa31015.During the initial inspection of the sample, the foil packet received showed numerous wrinkles, creases, and kinks also holes that is located in a kink could be observed on the bottom foil.This foil appearance is most probably caused by the routine opening and handling of the foil by theatre personnel.As part of the ethicon quality process, all devices are manufactured, inspected, and released to approved specifications.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.A manufacturing record evaluation was performed for the finished device lot number, and no related non-conformances were identified.

• Brand Name: ULTRAPRO ADVANCED
• Common Device Name: MESH, SURGICAL, POLYMERIC
• Manufacturer (Section D): ETHICON INC.; 1000 route 202; raritan NJ 08869
• Manufacturer (Section G): ETHICON INC.-GMBH; robert-koch strasse 1; p.o. box 1409; norderstedt ; GM
• Manufacturer Contact: elba bello ; 1000 route 202; raritan, NJ 08869 ; 9083863534
• MDR Report Key: 20272937
• Report Number: 2210968-2024-10148
• Device Sequence Number: 3393478
• Product Code: FTL
• UDI-Device Identifier: 10705031236998
• UDI-Public: (01)10705031236998(17)251231(10)UABGJXD0
• Combination Product (Y/N): N
• Initial Reporter Country: SW
• PMA/510(K) Number: K070224
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 12/31/2025
• Device Catalogue Number: UPA31015
• Device Lot Number: UABGJXD0
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 08/29/2024
• Supplement Date Received by Manufacturer: 09/25/2024
• Initial Report FDA Received Date: 09/20/2024
• Supplement Report FDA Received Date: 10/03/2024
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 01/31/2024
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown