MAUDE Adverse Event Report: BIOMET 3I CERTAIN LOW PROFILE 30 ABUTMENT 4.1MM(D) X 3MM(H); DENTAL ABUTMENT

Catalog Number	ILPAC4330
Medical Device Problem Code	Fracture (1260)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	09/03/2024
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Zimvie complaint number (b)(4).
Event or Problem Description
It is reported that the abutment fractured at screw.
Additional Manufacturer Narrative
Zimvie complaint number cmp-(b)(4).The following fields have been updated: b4: date of this report b5: describe event or problem g3: date received by manufacturer g6: type of report h1: type of reportable event h2: follow up type h3: device evaluated by manufacturer h6: adverse event problem h10: additional narrative zimvie received one (1) ilpac4330, (certain low profile 30 abutment 4.1mm(d) x 3mm(h)) for evaluation.Visual evaluation of the as returned device identified the abutment with signs of use.Abutment fracture identified at the threads.Functional testing to recreate the reported event could not be performed due to the nature of the device & event.This complaint refers to the specific device being investigated for this complaint record.Device history record (dhr) review was completed for the subject lot number 2018101639.No deviations or non-conformances, which could have caused or contributed to the reported event, were noted as part of the dhr.Complaint history review was performed for the reported lot number 2018101639 for similar events and no other complaint was identified.Review completed utilizing keywords: fracture screw.Based on the investigation and risk management file review, the most likely root causes determined from the investigation are incorrect technique used during placement/seating, or patient factors.Therefore, based on the available information, a device malfunction did occur.The reported event was confirmed with all the available information.No further investigation or immediate capa / hhe/d escalation is required, as the complaint investigation did not confirm the product was nonconforming at the time of distribution, and no new failure mode, harm, or hazardous situation was identified through the investigation performed.At this time, the complaint investigation has been completed and the record will be closed.If additional information is received, the record will be re-opened for further evaluation.
Event or Problem Description
No further event information is available at the time of this report.

• Brand Name: CERTAIN LOW PROFILE 30 ABUTMENT 4.1MM(D) X 3MM(H)
• Common Device Name: DENTAL ABUTMENT
• Manufacturer (Section D): BIOMET 3I; 4555 riverside drive; palm beach gardens FL 33410
• Manufacturer (Section G): BIOMET 3I; 4555 riverside drive; palm beach gardens FL 33410
• Manufacturer Contact: carlos gordian-arroyo ; 4555 riverside drive; palm beach gardens, FL 33410 ; 5619713230
• MDR Report Key: 20357415
• Report Number: 0001038806-2024-02239
• Device Sequence Number: 20625812
• Product Code: NHA
• UDI-Device Identifier: 00844868037613
• UDI-Public: (01)00844868037613(17)231031(10)2018101639
• Combination Product (Y/N): N
• Initial Reporter Country: SP
• PMA/510(K) Number: K092341
• Exemption Number: 5645646
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional
• Initial Reporter Occupation: Dentist
• Type of Report: Initial,Followup
• Report Date (Section B): 02/12/2025

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 10/30/2023
• Device Catalogue Number: ILPAC4330
• Device Lot Number: 2018101639
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 09/11/2024
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: Not provided
• Supplement Date Received by Manufacturer: Not provided
• Initial Report FDA Received Date: 10/03/2024
• Supplement Report FDA Received Date: 02/13/2025
• Was Device Evaluated by Manufacturer? (Y/N): Device Not Returned to Manufacturer
• Date Device Manufactured: 10/30/2018
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Patient Sex: Prefer Not To Disclose
• Patient Ethnicity: Non Hispanic