MAUDE Adverse Event Report: ETHICON INC. ETHLN BLK 18IN 6-0 S/A P-3 PRM MP; SUTURE, NONABSORBABLE, SYNTHETIC

Catalog Number	1698G
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported that a patient underwent a blepharoptosis procedure on an unknown date and suture was used.During continuous suturing, the suture was broken when using.It was not a control release needle.No adverse patient consequences were reported.Additional information was requested.
Additional Manufacturer Narrative
Product complaint # (b)(4).H6.Component code: g07002 - device not returned.Attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.Additional information was requested, and the following was obtained: -what is the lot number? ucbebl.This report is being submitted pursuant to the provisions of 21 cfr part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Additional Manufacturer Narrative
Product complaint # (b)(4).H6 component code: g07002 - no device problem found.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon inc, or its employees that the report constitutes an admission that the product, ethicon inc or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.H3 investigation summary; the product was returned to ethicon for evaluation.One open box with ten unopened samples was received for analysis.Product code 1698g.In order to evaluate the condition of the returned samples, the packets were opened.The swage and attachment area were noted as expected.The sutures were dispensed without problems and examined along the strand and no issues related to breakage sutures or anomalies were observed during the evaluation.The functional test was performed using instron equipment and the tensile force was above the minimum requirements.As part of the ethicon quality process, all devices are manufactured, inspected, and released to approved specifications.The event described could not be confirmed as the device performed without any difficulties noted.Although no product defect was identified, there may have been other circumstances or issues that occurred during the use of the device that could not be replicated during the laboratory analysis.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.A manufacturing record evaluation was performed for the finished device batch, and no non-conformances were identified.

• Brand Name: ETHLN BLK 18IN 6-0 S/A P-3 PRM MP
• Common Device Name: SUTURE, NONABSORBABLE, SYNTHETIC
• Manufacturer (Section D): ETHICON INC.; 1000 route 202; raritan NJ 08869
• Manufacturer (Section G): ETHICON INC.-SAN LORENZO PR; road 183, km 8.3; san lorenzo PR 00754
• Manufacturer Contact: elba bello ; 1000 route 202; raritan, NJ 08869 ; 9083863534
• MDR Report Key: 20550908
• Report Number: 2210968-2024-11167
• Device Sequence Number: 11575882
• Product Code: GAR
• UDI-Device Identifier: 10705031002180
• UDI-Public: (01)10705031002180(17)290228(10)UCBEBL
• Combination Product (Y/N): N
• Initial Reporter Country: JA
• PMA/510(K) Number: K946173
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 12/09/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 1698G
• Device Lot Number: UCBEBL
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 10/03/2024
• Supplement Date Received by Manufacturer: 11/11/2024
• Initial Report FDA Received Date: 10/28/2024
• Supplement Report FDA Received Date: 12/09/2024
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 03/18/2024
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown