|
Received two (2) samples: one (1) used.List #am6130, 6" smallbore ext set w/6-port nanoclave® manifold, check valve, clamp, rotating luer.One (1) used.List #am6130, 6" smallbore ext set w/6-port nanoclave® manifold, check valve, clamp, rotating luer, one (1) used.List #unknown, microclave.As received, no physical damage or other anomalies were observed leak tested both samples, sample #1 had a small hole in the tubing where it mates with the manifold, tubing bond was sufficient.Probable cause, unintentional bending forces during use.Sample #2 noticed that the connection at the mixing valve was not secure, the male luer was not fully inserted into the female luer threads, causing the leak.Probable cause, connection not fully inserted during assembly in (b)(6).Confirmed customer complaint of leaking where the tubing meets the manifold on both returned samples.D9 - date returned to mfg: 9/16/2024.A device history review (dhr) lot # review could not be conducted because no lot number(s) was/were identified.
|
|
An event on an unknown date involving a 6" smallbore ext set w/6-port nanoclave® manifold, check valve, clamp, rotating luer resulted in leakage.It was reported that their cicu had leaking issues with the am6130 manifold set.They had issues where there was leaking from one of the manifold claves.Sample is available for evaluation.There was unknown patient involvement, unknown adverse event and unknown delay in therapy.
|