MAUDE Adverse Event Report: MOTIVA USA LLC MOTIVA ERGONOMIX ROUND SILKSURFACE; MOTIVA IMPLANTS

Catalog Number	ERSD-360
Medical Device Problem Code	Device Appears to Trigger Rejection (1524)
Health Effect - Clinical Code	Capsular Contracture (1761)
Date of Event	02/23/2024
Type of Reportable Event	Serious Injury
Event or Problem Description
Patient complained about firmness at her breasts.Capsular contracture baker grade iv was diagnosed.No patient demographics, such as age, weight, or ethnicity, were provided by the reporter, and no adverse outcomes for the patient have been noted.Efforts to gather additional information are ongoing, and the investigation remains in progress.
Additional Manufacturer Narrative
The most common overall indication for reoperation is capsular contracture.(handel, 2006).Breast prostheses are no different from any foreign material implanted into the human body in the sense of triggering a protective immune reaction from the host.This ¿foreign body response¿ (fbr) is universal and ideally removes or otherwise surrounds the ¿irritant material¿ with fibrous tissue to prevent unwanted immune sequelae.A capsule around a breast implant is, therefore, a necessary mechanism of body defense, but if excessive it can lead to pain and deformity of the breast (steiert, et al., 2013).It has been identified several significant risk factors for capsular contracture, including device features (surface, size), surgical factors (periareolar incision, subglandular placement, antibiotic irrigation), the development of hematoma/seroma, and the use of a surgical bra.(calobrace, 2018).Periprosthetic capsules become pathologically active and undergo a ¿constrictive fibrosis¿ due to retraction of the fibrous tissue, which deforms their contents and impairs the aesthetic outcome, manifested by hardening of variable degree and, in advanced cases, by deformity of the breast.(baker et al., 1990).Per our directions for use, each patient must receive the establishment labs s.A.¿motiva implants®: information for the patient¿ during her surgical consultation, it is the surgeons´ responsibility to ensure that the patient completely understands the information regarding the risks, benefits, and recommendations associated with silicone gel-filled breast implant surgery, as well as the complications typical of any type of surgery.This document is available in motiva® website: ifu.Motiva.Health the instructions for use in the directions for use were reviewed to determine if there are indications that ensure the prevention and good handling of the product.For this event, it is considered that the information is suitable on the section of surgical precautions as follows: ¿capsular contracture occurs when the capsule tightens and squeezes the implant.This can cause the implant to turn rigid (from slightly firm to quite hard) and the firmest ones can cause varying degrees of discomfort, pain, and palpability.In addition to the firmness, capsular contracture can result in a deformed breast, visible surface wrinkling and/or displacement of the implant.Detection of breast cancer by mammography may also be a more difficult.Capsular contracture may be more common following infection, hematoma, and seroma, and the chance of it happening may increase over time.Capsular contracture is a risk factor for implant rupture, and it is the most common reason for reoperation in augmentation and reconstruction patients.Patients should also be advised that additional surgery might be needed in cases where pain and/or firmness are severe (baker grades iii or iv) and that capsular contracture may happen again after additional surgeries.Correction of capsular contracture may require surgical removal or release of the capsule, or removal and possible replacement of the implant itself.".Also, a complete review of the dhr was carried out, no deviation was found in the process, so it is established that there is no evidence of a relationship between the event and the manufacturing process.
Additional Manufacturer Narrative
· a clinical evaluation of the report and evidence provided was executed and a bilateral capsular contracture baker grade iv was confirmed.There was a relationship between the reported event and the device.Additionally, the device was received, visual inspection showed no defect/damage on the implant involved.· a complete review of the dhr for lot 22110524 was carried out, no deviation was found in the manufacturing processes.Review of complaint history for the reported lot number and sterilization run found no other similar complaints reported in the past.· a definitive root cause could not be determined.· as no manufacturing, material or design issues were identified, no further investigation or additional actions are required at this time.¿ · establishment labs will continue to monitor for similar complaints/trends.

• Brand Name: MOTIVA ERGONOMIX ROUND SILKSURFACE
• Common Device Name: MOTIVA IMPLANTS
• Manufacturer (Section D): MOTIVA USA LLC; 125 east de la guerra street; santa barbara CA 93101
• Manufacturer (Section G): ESTABLISHMENT LABS S.A; building b-25, coyol free zone; alajuela 20113 ; CS 20113
• Manufacturer Contact: susana hidalgo ; 125 east de la guerra street; santa barbara, CA 93101 ; 8003554164
• MDR Report Key: 20685336
• Report Number: 3012883202-2024-00119
• Device Sequence Number: 8557016
• Product Code: FTR
• UDI-Device Identifier: 07445161010599
• UDI-Public: (01)07445161010599(11)221111(17)271111
• Combination Product (Y/N): N
• Initial Reporter Country: KS
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2023
• Device Explanted Year: 2024
• Serviced by Third Party (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Health Professional
• Initial Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date (Section B): 11/14/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Operator of Device: Health Professional
• Device Catalogue Number: ERSD-360
• Device Lot Number: 22110524
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 10/28/2024
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 10/22/2024
• Supplement Date Received by Manufacturer: Not provided
• Initial Report FDA Received Date: 11/14/2024
• Supplement Report FDA Received Date: 01/10/2025
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 01/07/2025
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Other
• Patient Sex: Female