MAUDE Adverse Event Report: ALCON RESEARCH, LLC - HUNTINGTON ACRYSOF MULTIPIECE IOL; INTRAOCULAR LENS

Model Number	MN60AC
Medical Device Problem Code	Defective Device (2588)
Health Effect - Clinical Code	Insufficient Information (4580)
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
The lens was returned positioned incorrectly in the lens case in the carton.Viscoelastic was dried on the lens.The optic was broken (or cut) into two pieces.The optic edge was split.One haptic was bent in the distal area.Product history records were reviewed, and documentation indicated the product met release criteria.Associated product information was not provided.It is unknown if qualified products were used.The reported complaint was for "defective lens".The specific issue was not provided.Optic and haptic damage was observed which was most likely interpreted as the complaint.All lenses are 100 percent inspected for cosmetic attributes and the damage exhibited by the returned complaint sample would not have met company¿s release criteria.Based on our observation, it can be reasonably concluded that the damage is not manufacturing related.Due to the presence of surgical solution and the condition of the returned sample, the damage is most likely related to customer handling.The instructions for use (ifu) instructs: use holding forceps to grasp the lens by the optic edge and gently place the lens anterior side up into the back of the ophthalmic viscosurgical devices (ovd)-filled cartridge.The lens should be inserted until it is centered with or slightly past the outline etched into the top of the cartridge.Lenses with a 6.5 mm optic diameter may need to be pre-folded for easy entry into the back of the cartridge.Lens may be pre-folded by gently applying pressure to the edge of the lens while holding the central optic with forceps.The trailing haptic will extend from the proximal end of the cartridge.Position the trailing haptic to the left of the haptic post as shown in the detailed view.This will allow the plunger to go past the haptic during the initial advancement of the plunger into the cartridge.Verify the lens is positioned on the bottom surface of the cartridge.The haptic should be maintained to the left of the post when the lens is loaded correctly.Accurate positioning of the lens will decrease the potential for optic and haptic damage.The ifu instructs: company foldable iols are qualified for use with a company qualified delivery system (handpiece and cartridge) and ophthalmic viscosurgical device (ovd) combination.The ifu instructs that a company qualified delivery system and viscoelastic combination should be used.The use of an unqualified combination may cause damage to the lens and potential complications during the implantation process.The returned product expired 30-nov-2022.The complaint would have occurred before that date, or the product was used past the expiration date.Due diligence has been performed in an attempt to obtain further information on this event.The reporter has not responded to request for follow-up information.File will be reopened if new information is received.The manufacturer internal reference number is: (b)(4).
Event or Problem Description
A non-healthcare professional reported with the description of defective lens.Additional information has been requested.

• Brand Name: ACRYSOF MULTIPIECE IOL
• Common Device Name: INTRAOCULAR LENS
• Manufacturer (Section D): ALCON RESEARCH, LLC - HUNTINGTON; 6065 kyle lane; huntington WV 25702
• Manufacturer (Section G): ALCON RESEARCH, LLC - HUNTINGTON; 6065 kyle lane; huntington WV 25702
• Manufacturer Contact: jonathan schlech ; 6201 south freeway; mail stop ab2-6; fort worth, TX 76134 ; 8007579780
• MDR Report Key: 20851192
• Report Number: 1119421-2024-02377
• Device Sequence Number: 12800016
• Product Code: HQL
• UDI-Device Identifier: 00380655095065
• UDI-Public: (01)00380655095065(17)221130(11)171214(10)12582978
• Combination Product (Y/N): N
• Initial Reporter State: GA
• Initial Reporter Country: US
• PMA/510(K) Number: P930014
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Company Representative
• Initial Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial
• Report Date (Section B): 12/05/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 11/30/2022
• Device Model Number: MN60AC
• Device Catalogue Number: MN60AC.175
• Device Lot Number: 12582978
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 11/08/2024
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 11/06/2024
• Initial Report FDA Received Date: 12/05/2024
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 12/14/2017
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): Yes
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown