MAUDE Adverse Event Report: MDT POWERED SURGICAL SOLUTIONS ATT MR8 ANGLED; MOTOR, DRILL, PNEUMATIC

Model Number	MR8-AA07
Medical Device Problem Code	Overheating of Device (1437)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	09/12/2024
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
H3: product analysis: evaluation confirmed overheating.The device was tested and the maximum temperature was measured to be >109°f.The likely cause of failure could not be determined.It was also noted noise, laser markings faded, housing nut is completely stuck and was heavily damaged.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
Event or Problem Description
Repair request initiated for device with the report of overheating.No patient impact reported.Repair request escalated to product event due to customer indication that this report is a complaint.

• Brand Name: ATT MR8 ANGLED
• Common Device Name: MOTOR, DRILL, PNEUMATIC
• Manufacturer (Section D): MDT POWERED SURGICAL SOLUTIONS; 4620 n beach st; fort worth TX 76137
• Manufacturer (Section G): MDT POWERED SURGICAL SOLUTIONS; 4620 n beach st; fort worth TX 76137
• Manufacturer Contact: justin ellis ; 8200 coral sea street ne mvs21; mounds view, MN 55112 ; 7635265677
• MDR Report Key: 20900203
• Report Number: 1625507-2024-01184
• Device Sequence Number: 15689128
• Product Code: HBB
• UDI-Device Identifier: 00643169912380
• UDI-Public: 00643169912380
• Combination Product (Y/N): N
• Initial Reporter Country: SP
• PMA/510(K) Number: K183515
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial
• Report Date (Section B): 12/11/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: MR8-AA07
• Device Catalogue Number: MR8-AA07
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 09/18/2024
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 11/29/2024
• Initial Report FDA Received Date: 12/11/2024
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 10/13/2021
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Reuse
• Patient Sequence Number: 1
• Patient Sex: Unknown