| Model Number |
UNKNOWN |
| Medical Device Problem Codes |
Break (1069); Fracture (1260)
|
| Health Effect - Clinical Code |
Foreign Body In Patient (2687)
|
| Date of Event |
12/02/2024
|
|
Type of Reportable Event
|
Serious Injury
|
|
Additional Manufacturer Narrative
|
|
Based on the available information the device will not be returned therefore an evaluation of the device cannot be performed.A review of the device history is not possible because the lot number was not communicated.Should additional information become available, it will be provided in a supplemental report.
|
| |
|
Event or Problem Description
|
|
It was reported that during a primary surgery, two drill bits broke while drilling.The initial breakage led to the use of a backup drill, which also broke.Despite attempts to remove the broken fragments, the drill bits remained unrecoverable and were left in the patient.The surgery was completed using another drill, with a delay of two minutes.No issues were reported with the drills themselves before the surgery.Plates and screws were utilized in combination with the drills during the procedure.
|
| |
|
Additional Manufacturer Narrative
|
|
The reported event could not be confirmed since the device was not returned for evaluation and no other evidences were provided.More detailed information about the complaint event as well as the affected device must be available in order to determine the root cause of the complaint event.A x-ray was received, however, the alleged broken drills are not visible and the reported incident could not be confirmed.A review of the device history was not possible because the lot number was not communicated.No corrective actions are required at this time.A review of the labeling did not indicate any abnormalities.Indications of material, manufacturing, or design related problems were unable to be identified as the lot number was not communicated.If the device is returned or if any additional information is provided, the investigation will be reassessed.
|
| |
|
Event or Problem Description
|
|
It was reported that during a primary surgery, two drill bits broke while drilling.The initial breakage led to the use of a backup drill, which also broke.Despite attempts to remove the broken fragments, the drill bits remained unrecoverable and were left in the patient.The surgery was completed using another drill, with a delay of two minutes.No issues were reported with the drills themselves before the surgery.Plates and screws were utilized in combination with the drills during the procedure.
|
| |
|
Search Alerts/Recalls
|