MAUDE Adverse Event Report: SYNTHES GMBH SYNFRAME HALF-RING, FOR HOLDING RING NO.; ORTHOPEDIC MANUAL SURGICAL INSTRUMENT

Catalog Number	387.337
Medical Device Problem Code	Compatibility Problem (2960)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	12/20/2024
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Product complaint # (b)(4).Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
It was reported that on (b)(6) 2024, the nurse was setting up the synframe and noticed that two (2) synframe rings had stripped screws, making it difficult to assemble to synframe ring.Also, the surgeon broke the rod guide for the synframe homan blade.Fragments that were generated were removed.The procedure was completed successfully.The patient was not impacted.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: h3, h6: photo investigation: the product was not returned to medtech orthopaedics; however, photos were provided for review.The photo investigation did not reveal that synframe half-ring, for holding ring no.(387.337) had any assembly issue.Review of provided photo shows the device however without having actual device for evaluation reported condition cannot be confirmed and cause remains undetermined.Since the device was not returned, a dimensional inspection cannot be performed.The overall complaint was not confirmed as the observed condition of the synframe half-ring, for holding ring no.Would not contribute to the complained device issue.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the complaint condition.As part of medtech orthopaedics quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history review (dhr): lot # provided is not a valid number, therefore, the dhr could not be completed.If device is returned or lot number can be confirmed, the dhr will be revisited.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.The device was received, the investigation is in progress, no conclusion could be drawn at the time of filing this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H3, h6: the product was returned to j&j medtech orthopaedics for evaluation.The j&j medtech orthopaedics team conducted a visual inspection of the returned device.Visual analysis of the returned sample found the screw of the synframe half-ring, for holding ring no stripped, this condition can be a key factor to not assemble correctly into the mating device.A dimensional inspection was not performed due to post manufacturing damage.The observed condition of the device was consistent with a random component failure that may have been caused by exposure to unintended forces.As part of j&j medtech orthopaedics quality process, all devices are manufactured, inspected, and released to approved specifications.The overall complaint was confirmed as the observed condition of the synframe half-ring, for holding ring no.Would contribute to the complained device issue.There is no indication that a design or manufacturing issue has caused the complaint condition.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history review: part number: 50131166, 387.336-us, 387.336-15.Lot number: 50131166 (lot 9713p13), 387.336-us (lot 9652p63), 387.336-15 (lot 9652p64) manufacturing site: hägendorf.Release to warehouse date: 08-may-2024 (387.336-us, lot 9652p63), 13-may-2024 (387.336-15, lot 9652p64).A manufacturing record evaluation was performed for the finished device batch number, and no non-conformances were identified.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: SYNFRAME HALF-RING, FOR HOLDING RING NO.
• Common Device Name: ORTHOPEDIC MANUAL SURGICAL INSTRUMENT
• Manufacturer (Section D): SYNTHES GMBH; luzernstrasse 19-21; zuchwil 4528 ; SZ 4528
• Manufacturer (Section G): MONUMENT; 1101 synthes avenue; monument CO 80132
• Manufacturer Contact: kate karberg ; 1302 wright lane east; west chester, PA 19380 ; 3035526892
• MDR Report Key: 21113446
• Report Number: 8030965-2025-00335
• Device Sequence Number: 18010917
• Product Code: LXH
• UDI-Device Identifier: 07611819109216
• UDI-Public: (01)07611819109216(10)9713P13
• Combination Product (Y/N): N
• Initial Reporter Country: CA
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 387.337
• Device Lot Number: 9713P13
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 12/20/2024
• Supplement Date Received by Manufacturer: 01/14/2025; 02/12/2025; 05/30/2025
• Initial Report FDA Received Date: 01/09/2025
• Supplement Report FDA Received Date: 01/19/2025; 02/24/2025; 06/02/2025
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Patient Sex: Unknown