MAUDE Adverse Event Report: ETHICON INC. ETHLN BLK 12IN 10-0 D/A CS140-8; SUTURE, NONABSORBABLE, SYNTHETIC

Catalog Number	9033G
Medical Device Problem Code	Material Separation (1562)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	12/01/2024
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Product complaint # (b)(4).H6 component code: g07002 - device not returned.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon inc, or its employees that the report constitutes an admission that the product, ethicon inc or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.A manufacturing record evaluation was performed for the finished device lot, and no non-conformances were identified.Attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.D4: full udi currently unavailable since the exact lot of the suspected device cannot be determined.
Event or Problem Description
It was reported that a patient underwent an unknown procedure on (b)(6) 2024 and suture was used.During the procedure, it was reported that the problem of pulling off suture needle happened in surgery.Changed another one to continue the surgery, the same problem happened.Changed another one to complete the surgery.There is no report on patient's injury.Enclosed please find defect photo.The 1 actual sample was discarded.The surgeon refused to use the remaining 22 sterile products from the same lot and they will be returned for analysis.No additional information could be provided.There were no adverse consequences reported.Additional information was requested.
Additional Manufacturer Narrative
Product complaint # (b)(4).Date sent to the fda: 2/19/2025.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Additional Manufacturer Narrative
Product complaint # (b)(4).Date sent to the fda: 4/3/2025.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Corrected information: h6 investigational codes, h11 (h3 investigational summary).H6 component code: g07002 no device problem found.Additional information: d9, h3, h6.H3 investigational summary: the product was returned to ethicon for evaluation.Two open boxes whit a total of twenty two unopened samples were received for analysis.The product code 9033g is double armed.As per the sampling plan, a visual inspection was performed on thirteen samples, the packets were opened.The swage and attachment area were noted as expected.The sutures were dispensed without problems and examined along the strand no anomalies were observed during the evaluation.The functional test was performed using instron equipment and the pull force result was above the minimum requirements.As part of the ethicon quality process, all devices are manufactured, inspected, and released to approved specifications.The event described could not be confirmed as issues related to pull off - suture needle were noted.Although no product defect was identified, there may have been other circumstances or issues that occurred during the use of the device that could not be replicated during the laboratory analysis.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.
Additional Manufacturer Narrative
Product complaint # (b)(4).Date sent to the fda: 4/3/2025.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.H6 component code: g07002 no device problem found.H6 component code: c22 - photo analysis.H3 investigational summary: the product was returned to ethicon for evaluation.One folder with a detached needle and a needle suture combination inserted into foam park outside the overwrap package was received for analysis.The product code 9033g is double armed.In order to evaluate the conditions of the detached needle, the swage area and hole were noted with marks by a surgical instrument.The hole was examined under magnification and a remnant of suture was observed.In addition, the suture was inspected, and the end was noted to be cut probably caused by a surgical instrument.In addition, the other extreme of the suture was attached to the needle.Additionally, a photo was provide and it showed three overwrap for product code 9033, but different lot numbers.As part of the ethicon quality process, all devices are manufactured, inspected, and released to approved specifications.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.

• Brand Name: ETHLN BLK 12IN 10-0 D/A CS140-8
• Common Device Name: SUTURE, NONABSORBABLE, SYNTHETIC
• Manufacturer (Section D): ETHICON INC.; 1000 route 202; raritan NJ 08869
• Manufacturer (Section G): ETHICON INC.-JUAREZ; calle durango #2751; ciudad juarez 32575 ; MX 32575
• Manufacturer Contact: elba bello ; 1000 route 202; raritan, NJ 08869 ; 9083863534
• MDR Report Key: 21162400
• Report Number: 2210968-2025-00567
• Device Sequence Number: 12752996
• Product Code: GAR
• UDI-Device Identifier: 10705031022515
• UDI-Public: (01)10705031022515(17)270731(10)SJMPZR
• Combination Product (Y/N): N
• Initial Reporter Country: CH
• PMA/510(K) Number: K946173
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup,Followup
• Report Date (Section B): 04/03/2025

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 9033G
• Device Lot Number: SJMPZR
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 12/19/2024
• Supplement Date Received by Manufacturer: 02/12/2025; 03/10/2025; 03/10/2025
• Initial Report FDA Received Date: 01/15/2025
• Supplement Report FDA Received Date: 02/19/2025; 04/03/2025; 04/03/2025
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 08/23/2022
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown