MAUDE Adverse Event Report: ALCON RESEARCH, LLC - HUNTINGTON ACRYSOF MULTIPIECE IOL; INTRAOCULAR LENS

Model Number	MA60MA
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/08/2025
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
A product was not returned for analysis.Complaint history and product history records were reviewed and documentation indicated the product met release criteria.Root cause has not been identified.The manufacturer internal reference number is: (b)(4).
Event or Problem Description
A physician reported that during an intraocular lens (iol) implant procedure, the posterior haptic was broken.The lens was not implanted in the patient, the patient was fine and other lens was placed to replace the faulty lens.Additional information has been requested.
Additional Manufacturer Narrative
Additional information was provided in d.9., h.3., h.6 and h.11.The lens was returned positioned incorrectly in the lens case inside the lens carton.Viscoelastic and possibly blood was dried on the lens.One haptic was broken inside the haptic insertion area.The welded portion of this haptic was still intact inside the haptic insertion area of the optic.Associated product information was not provided.The company lens model is only qualified for use in a company cartridge.It is unknown if a qualified product combination was used.The reported broken haptic damage was observed.All lenses are 100 percent inspected for cosmetic attributes and the damage exhibited by the returned complaint sample would not have met company release criteria.Based on our observation, it can be reasonably concluded that the damage is not manufacturing related.Due to the presence of surgical solution and the condition of the returned sample, the damage is most likely related to customer handling.Haptic manufacturing is a validated process with multiple inspections to verify the quality of the produced haptic material.These inspections include a verification of the dimensional accuracy, tensile strength, flexibility and cosmetic appearance.The inspections ensure that the material meets all required specifications before it is allocated for use.The instructions for use (ifu) instructs: company foldable intraocular lens (iols) are qualified for use with an company qualified delivery system (handpiece and cartridge) and ophthalmic viscosurgical device (ovd) combination.It is unknown if qualified associated products were used.The ifu instructs that an company qualified delivery system and viscoelastic combination should be used.The use of an unqualified combination may cause damage to the lens and potential complications during the implantation process.The ifu instructs: use holding forceps to grasp the lens by the optic edge and gently place the lens anterior side up into the back of the ovd filled cartridge.The lens should be inserted until it is centered with or slightly past the outline etched into the top of the cartridge.Lenses with a 6.5 mm optic diameter may need to be pre folded for easy entry into the back of the cartridge.Lens may be pre folded by gently applying pressure to the edge of the lens while holding the central optic with forceps.The trailing haptic will extend from the proximal end of the cartridge.Position the trailing haptic to the left of the haptic post as shown in the detailed view.This will allow the plunger to go past the haptic during the initial advancement of the plunger into the cartridge.Verify the lens is positioned on the bottom surface of the cartridge.The haptic should be maintained to the left of the post when the lens is loaded correctly.Accurate positioning of the lens will decrease the potential for optic and haptic damage.Due diligence has been performed in an attempt to obtain further information on this event.The reporter has not responded to request for follow up information.File will be reopened if new information is received.The manufacturer internal reference number is: (b)(4).

• Brand Name: ACRYSOF MULTIPIECE IOL
• Common Device Name: INTRAOCULAR LENS
• Manufacturer (Section D): ALCON RESEARCH, LLC - HUNTINGTON; 246 kyle lane; huntington WV 25702
• Manufacturer (Section G): ALCON RESEARCH, LLC - HUNTINGTON; 246 kyle lane; huntington WV 25702
• Manufacturer Contact: jonathan schlech ; 6201 south freeway; mail stop ab2-6; fort worth, TX 76134 ; 8007579780
• MDR Report Key: 21291442
• Report Number: 1119421-2025-00276
• Device Sequence Number: 15791720
• Product Code: HQL
• UDI-Device Identifier: 00380652240123
• UDI-Public: (01)00380652240123(17)280118(11)230120(10)15566385
• Combination Product (Y/N): N
• Initial Reporter Country: EC
• PMA/510(K) Number: P930014
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date (Section B): 04/02/2025

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: MA60MA
• Device Catalogue Number: MA60MA.000
• Device Lot Number: 15566385
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 01/09/2025
• Supplement Date Received by Manufacturer: 03/06/2025
• Initial Report FDA Received Date: 02/03/2025
• Supplement Report FDA Received Date: 04/02/2025
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 01/20/2023
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown