MAUDE Adverse Event Report: DEPUY IRELAND - 9616671 ATTUNE 0 DEG LEFT CUT BLOCK; RESECTION BLOCKS/DEVICES

Catalog Number	254400014
Medical Device Problem Code	Material Deformation (2976)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/23/2025
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported that cut slot is damaged and metal is bent.There was no surgical delay and no patient consequence.
Additional Manufacturer Narrative
Product complaint #(b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Product complaint # (b)(4).Investigation summary damaged cut slot.Metal bent the product was returned to j&j medtech orthopaedics for evaluation.Visual inspection of the attune 0 deg left cut block revealed deformations at the corners of the cutting slot, resulting on a burred condition.Additionally, the overall device surface exhibited signs of heavy usage.The deformation is consistent with the cutting blade making contact outside of its intended range/cutting section.Properly handling and attention to the approved use of the device diminishes the risk of failure.A dimensional inspection was unable to be performed due to the post-manufacturing damage.A functional test was unable to be performed due to the post-manufacturing damage.The overall complaint was confirmed as the observed condition of the attune 0 deg left cut block would have contributed to the complained device issue.¿ based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the reported complaint condition.As part of j&j medtech orthopaedics quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot the product investigation found no evidence suspecting an error in the manufacturing or material that would be a contributing factor in the reported allegation(s).A manufacturing records evaluation (mre) was not performed.H11 additional narrative: corrected: g3.
Additional Manufacturer Narrative
Product complaint #(b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.H10 additional narrative: added: d9.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.

• Brand Name: ATTUNE 0 DEG LEFT CUT BLOCK
• Common Device Name: RESECTION BLOCKS/DEVICES
• Manufacturer (Section D): DEPUY IRELAND - 9616671; loughbeg ringaskiddy co.; cork ; EI
• Manufacturer Contact: kate karberg ; 700 orthpaedic dr.; warsaw, IN 46581 ; 3035526892
• MDR Report Key: 21297363
• Report Number: 1818910-2025-01982
• Device Sequence Number: 21143609
• Product Code: HTZ
• UDI-Device Identifier: 10603295421078
• UDI-Public: (01)10603295421078(10)PG225332
• Combination Product (Y/N): N
• Initial Reporter Country: AS
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 254400014
• Device Lot Number: PG225332
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 01/23/2025
• Supplement Date Received by Manufacturer: 03/11/2025; 03/24/2025
• Initial Report FDA Received Date: 02/03/2025
• Supplement Report FDA Received Date: 03/12/2025; 03/25/2025
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 06/24/2021
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Patient Sex: Unknown