MAUDE Adverse Event Report: DEPUY MITEK LLC US CLEARCANNULA-THREADED 8.5MMX55MM 5PK -ST; CANNULA, SURGICAL, GENERAL & PLASTIC SURGERY

Catalog Number	214118
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	02/03/2025
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by mitek or its employees that the report constitutes an admission that the device, mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H11 additional narrative: as of this date, the device has not been returned for evaluation; therefore, the reported condition cannot be confirmed and/or duplicated.
Event or Problem Description
It was reported that during pre-surgery for an unknown procedure, it was observed that the clearcannula-threaded 8.5mmx55mm device tip was broken.There was no delay in the procedure reported.There were no adverse patient consequences reported.No additional information was provided.
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by mitek or its employees that the report constitutes an admission that the device, mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H11 additional narrative: the complaint device was not returned to j&j medtech orthopaedics, therefore unavailable for a physical evaluation.A manufacturing record evaluation was performed for the finished device lot number (2403193), and no non-conformance was identified.Based on the current available information, we cannot determine a root cause for the reported failure.If the complaint device is received in the future, we will reopen the complaint and perform the investigation as appropriate.It has been determined that no corrective and/or preventative action is proposed and there is no indication that a design or manufacturing issue has caused the reported complaint condition.As part of j&j medtech orthopaedics quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by mitek or its employees that the report constitutes an admission that the device, mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H11 additional narrative: the product was returned to j&j medtech orthopaedics for evaluation.Visual inspection of the returned device found that the device comes completely out of its original package.The device has no structural anomalies or damages on the tips.The rubber bung was reviewed and no damages were found.The overall complaint was not confirmed as the observed condition of the clearcannula-threaded 8.5mmx55mm 5pk -st would have not contributed to the complained device issue.Based on the findings, the investigation could not draw any conclusions and no potential cause about the reported event can be established since no issues were found.It has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the reported complaint condition.As part of j&j medtech orthopaedics quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.

• Brand Name: CLEARCANNULA-THREADED 8.5MMX55MM 5PK -ST
• Common Device Name: CANNULA, SURGICAL, GENERAL & PLASTIC SURGERY
• Manufacturer (Section D): DEPUY MITEK LLC US; 325 paramount drive; raynham MA 02767
• Manufacturer (Section G): DEPUY MITEK LLC US; 4500 riverside drive; palm beach gardens FL
• Manufacturer Contact: kate karberg ; 4500 riverside drive; palm beach gardens, FL ; 3035526892
• MDR Report Key: 21343124
• Report Number: 1221934-2025-00516
• Device Sequence Number: 9078778
• Product Code: GEA
• UDI-Device Identifier: 10886705003594
• UDI-Public: (01)10886705003594(10)2403193(17)290430
• Combination Product (Y/N): N
• Initial Reporter Country: TH
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,User Facility,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup
• Report Date (Section B): 02/10/2025

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 214118
• Device Lot Number: 2403193
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 02/04/2025
• Supplement Date Received by Manufacturer: 02/26/2025; 05/08/2025
• Initial Report FDA Received Date: 02/10/2025
• Supplement Report FDA Received Date: 02/27/2025; 05/12/2025
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 05/01/2024
• Is the Device Labeled for Single Use? (Y/N): Yes
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown