|
ZIMMER BIOMET, INC. COMP PRIMARY STEM 9MM MINI; PROSTHESIS, SHOULDER, SEMI-CONSTRAINED, METAL/POLYMER, UNCEMENTED
|
Back to Search Results |
|
| Catalog Number |
113629 |
| Medical Device Problem Code |
Insufficient Device Problem Information (3190)
|
| Health Effect - Clinical Code |
Insufficient Information (4580)
|
|
Type of Reportable Event
|
Serious Injury
|
|
Additional Manufacturer Narrative
|
|
This event is recorded by zimmer biomet under (b)(4).G2, country event occurred in: australia.Component codes: proposed g-code: mechanical (g04) - stem.D10 narrative: item:ep-115395, lot: 093300, item number: e1 44-36 rtnv +3 hmrl brg.Item:115310, lot: 045290, item number: comp rvrs shldr glnsp std 36mm.Item:115370, lot: 795950, item number: comp rvs tray co 44mm.Item: 115397, lot: 478340, item number: comp rvs cntrl 6.5x35mm st/rst.Item:180553, lot: 420680, item number: comp lk scr 3.5hex, 4.75x30 st.Item: 180553, lot: 420680, item number: comp lk scr 3.5hex, 4.75x30 st.Item:180554, lot: 330090, item number: comp lk scr 3.5hex 4.75x35 st.Item:180554, lot: 146450, item number: comp lk scr 3.5hex 4.75x35 st.The product is in the process of being evaluated by zimmer biomet.Once the product investigation has been completed, a follow up/final report will be submitted.
|
| |
|
Event or Problem Description
|
|
It was reported that a patient had an initial right reverse total shoulder arthroplasty performed, which was revised 4 days later due to dissociation.Subsequently, the patient is now being considered for a patient matched implant due to unknown reasons.
|
| |
|
Event or Problem Description
|
|
No further event information is available at the time of this report.
|
| |
|
Additional Manufacturer Narrative
|
|
(b)(4).This follow-up report is being submitted to relay additional information.The following sections were updated/corrected: b4; b5; b7; d2; d6a; g1; g3; g6; h1; h2; h3; h6 if any further information is found that would change or alter any conclusions or information, a supplemental will be filed accordingly.Zimmer biomet will continue to monitor for trends.
|
| |
|
Event or Problem Description
|
|
No further event information is available at the time of this report.
|
| |
|
Additional Manufacturer Narrative
|
|
This follow-up report is being submitted to relay additional information.The following sections were updated: b4, b5, g3, g6, h2, h3, h6, h11.H10: related report #s: 0001825034-2025-00722; 0001825034-2025-00724; 0001825034-2025-00723; 0001825034-2025-00726.0001825034-2025-00725; 0001825034-2025-00728; 0001825034-2025-00730; 0001825034-2025-00729; 0001825034-2025-00731; 0001825034-2025-00995.No product was returned or pictures provided; visual and dimensional evaluations could not be performed.Review of the device history record(s) identified no deviations or anomalies during manufacturing.Nursing timeline reviewed information provided and identified the following: pmi request received, pending revision due to unknown reason.The rep response states that the patient was booked for a revision approximately 2 years ago (unknown if this is referring to knee or shoulder prosthesis).Medical records were not provided.A definitive root cause cannot be determined.Both baseplates/taper adapters are a part of a bet recall.The reason for this revision is unknown, and therefore, cannot be determined if the reported event is related to the deviations/recall the reported event is not confirmed.If any further information is found which would change or alter any conclusions or information, a supplemental will be filed accordingly.Zimmer biomet will continue to monitor for trends.
|
| |
|
Search Alerts/Recalls
|
|
|