| Catalog Number |
0279351100 |
| Medical Device Problem Code |
Overheating of Device (1437)
|
| Health Effect - Clinical Code |
No Clinical Signs, Symptoms or Conditions (4582)
|
| Date of Event |
01/09/2025
|
|
Type of Reportable Event
|
Malfunction
|
|
Event or Problem Description
|
|
It was reported that the probe heated up.
|
| |
|
Additional Manufacturer Narrative
|
|
Additional information will be provided once the investigation has been completed.The device manufacturer date is not known at this time.However, should it become available it will be provided in future reports.
|
| |
|
Additional Manufacturer Narrative
|
|
It was confirmed that the device was discarded by the customer and will not be returning.This complaint investigation was closed based on the device not received, therefore the reported failure mode was not confirmed.In the event that the device is received, the complaint will be reopened and the investigation will be updated with new results.Alleged failure: suction probe melted.Probable root cause: heat can result from insufficient suction which can result from: * inadequate hospital suction, leak, bad connection to hospital suction line, * clogging caused by suction path blockage, lower electrode mass due to variation in electrode thickness or opening cut.Use errors.Nonbendable probe bent with probe bender, or a bendable probe bent with anything other than the stryker rf probe bender.Probe used as a tool for mechanical displacement of tissue or bone, or to pry or scrub.Probe handle is submerged in liquid or suction tube is cut.Pinch clamps left closed when suction is desired or open if suction is not being used incorrect fluid management.The reported failure mode will be monitored for future reoccurrence.
|
| |
|
Event or Problem Description
|
|
It was reported that the probe heated up.
|
| |
|
Search Alerts/Recalls
|