MAUDE Adverse Event Report: TIDI PRODUCTS LLC SITTER ON CUE; MONITOR, BED PATIENT

Model Number	8645
Medical Device Problem Code	No Audible Alarm (1019)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	02/11/2025
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
This report is based solely on the information provided by the customer.A review of the complaint database revealed similar complaints of 8645 alarms either sounding when they shouldn¿t or not sounding when they should.Investigations into these complaints revealed that the most likely cause of the reported complaint is either damage to the sensor receptacle or damage to the rj-11 clip.Damage can cause the pins inside the sensor receptacle to become stuck down, either triggering no alarm or false alarm.It can also cause the sensor cable to not have a secure fit in the receptacle, which can allow movement to affect function.Likewise with damage to the sensor cable clip.Other causes, such as corrosion and moisture damage, are also a possibility.Being that the unit has been in use for nearly 4 years, it is likely normal wear and tear that contributed to the reported issue.The instructions for use (ifu) were reviewed and found to provide adequate instructions and warnings for safe and effective use of the device.The ifu states that to reduce the risk of serious injury or death, test the alarm and sensor for proper operation prior to putting in service with a patient, and each time before leaving the patient unattended.If the alarm and/or sensor do not function properly, remove the alarm and sensor from service and replace them with a properly functioning alarm and/or sensor.Do not use the alarm or sensor if it does not activate each time weight is removed from the sensor or the sensor belt is unfastened.All complaints are trended and reviewed by management on a monthly basis.As part of this monthly review, any excursion above the control limits for this failure mode will be assessed, documented and acted upon as warrant.Manufacturer reference file (b)(4).
Event or Problem Description
Customer reported alarm not working properly.Alarm will blink amber (sn: (b)(6) but does not produce any sounds.No patient incident or injury was reported.

• Brand Name: SITTER ON CUE
• Common Device Name: MONITOR, BED PATIENT
• Manufacturer (Section D): TIDI PRODUCTS LLC; 570 enterprise drive; neenah WI 54956
• Manufacturer Contact: chris rahn ; 570 enterprise drive; neenah, WI 54956 ; 9207514300
• MDR Report Key: 21647896
• Report Number: 2182318-2025-00026
• Device Sequence Number: 20703031
• Product Code: KMI
• UDI-Device Identifier: 10190676007131
• UDI-Public: 10190676007131
• Combination Product (Y/N): N
• Initial Reporter State: OR
• Initial Reporter Country: US
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): N
• Reporter Type: Manufacturer
• Report Source: User Facility
• Initial Reporter Occupation: Other
• Type of Report: Initial
• Report Date (Section B): 02/19/2025

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Model Number: 8645
• Device Catalogue Number: 8645
• Was Device Available for Evaluation?: No
• Was the Report Sent to FDA?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 02/19/2025
• Initial Report FDA Received Date: 03/19/2025
• Was Device Evaluated by Manufacturer? (Y/N): No
• Date Device Manufactured: 09/13/2021
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Patient Sex: Unknown