MAUDE Adverse Event Report: COVIDIEN LP - SUPERDIMENSION INC EMPRINT HP; SYSTEM, ABLATION, MICROWAVE AND ACCESSORIES

Model Number	CAGENHP
Medical Device Problem Codes	Device Alarm System (1012); No Apparent Adverse Event (3189); Appropriate Device Problem Term/Code Not Available (3191)
Health Effect - Clinical Code	Insufficient Information (4580)
Date of Event	04/01/2025
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported that the procedure was cancelled while the patient was under anesthesia due to an alarm issue.There was a temperature issue displayed on the screen when the device was applied with the connector.Several attempts were made to reconnect, but the screen continued to show the temperature issue.
Additional Manufacturer Narrative
D10 concomitant products: ca15l2, ca15l2 15cm rein percutaneous antenna x1 (lot#:s24lg009).Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
Additional Manufacturer Narrative
Additional information: b5, d1, d2, d4 (model & catalog#, serial#, udi), g3, g4 (510k), h4, h6 additional information received shows that there is no information to reasonably suggest that the device in this report may have caused or contributed to a death or serious injury or that the device in this report has malfunctioned.Therefore, this event does not meet the reporting requirements in 21 cfr 803.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
Event or Problem Description
It was reported that the procedure, there was a temperature issue displayed on the screen when the device was applied with the connector.Several attempts were made to reconnect, but the screen continued to show the temperature issue.Due to the incident, the procedure was halted momentarily to replaced the defective device and it worked fine.

• Brand Name: EMPRINT HP
• Common Device Name: SYSTEM, ABLATION, MICROWAVE AND ACCESSORIES
• Manufacturer (Section D): COVIDIEN LP - SUPERDIMENSION INC; 161 cheshire lane, suite 100; plymouth MN 55441
• Manufacturer (Section G): COVIDIEN LP - SUPERDIMENSION INC; 161 cheshire lane, suite 100; plymouth MN 55441
• Manufacturer Contact: justin ellis ; 8200 coral sea st ne; mounds view, MN 55112 ; 7635265677
• MDR Report Key: 21867498
• Report Number: 3004962788-2025-00057
• Device Sequence Number: 18084586
• Product Code: NEY
• UDI-Device Identifier: 10884521781276
• UDI-Public: 10884521781276
• Combination Product (Y/N): N
• Initial Reporter Country: TH
• PMA/510(K) Number: K200796
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup
• Report Date (Section B): 04/28/2025

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: CAGENHP
• Device Catalogue Number: CAGENHP
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 04/01/2025
• Supplement Date Received by Manufacturer: 04/21/2025
• Initial Report FDA Received Date: 04/18/2025
• Supplement Report FDA Received Date: 04/28/2025
• Date Device Manufactured: 02/02/2023
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: SEE H11
• Patient Sex: Unknown