MAUDE Adverse Event Report: HOLOGIC, INC. BIOZORB; MARKER RADIOGRAPHIC IMPLANTABLE

Model Number	F0202
Medical Device Problem Code	Adverse Event Without Identified Device or Use Problem (2993)
Health Effect - Clinical Codes	Itching Sensation (1943); Breast Discomfort/Pain (4504); Swelling/ Edema (4577)
Date of Event	03/15/2021
Type of Reportable Event	Serious Injury
Additional Manufacturer Narrative
Hologic is submitting this report in accordance with 21.Cfr part 803.The submission is based upon the currently available information.The submission of this report does not represent a confirmation of device malfunction involving the hologic products in the event described.Lot number of the device not provided by the complainant; therefore, the udi, expiration and manufacturing dates are not known.Device history record (dhr) review was unable to be conducted for the disposable device as the identification numbers were not provided by the complainant.The device involved in this event was not returned for evaluation purposes therefore visual and functional analysis of the product could not be performed.We are unable to confirm a relationship between the device and the issue reported.The information obtained during complaint investigation will be included in our global complaint trending and product surveillance will continue to monitor complaints of this type for adverse trends.If the product is received or additional information is obtained, the investigation will be reopened accordingly per standard operating procedure.
Event or Problem Description
It was reported that a patient received a biozorb on (b)(6) 2021, after the implantation the patient reported experienced pain, discomfort, discoloration, itching, swelling, sensitivity, failure to resorb.The patient had the device removed on (b)(6) 2025.No other information available.
Additional Manufacturer Narrative
An investigation was conducted: it was reported that a patient received a biozorb on (b)(6) 2021.After the implantation, the patient reported experiencing pain, discomfort, discoloration, itching, swelling, sensitivity, and failure to resorb.The patient had the device removed on (b)(6) 2025.No other information is available.No initial evaluation could be performed because there was no returned sample for this complaint.The sample was not returned to the post market quality laboratory for investigation; therefore, an inspection could not be performed.Additionally, there was limited patient-related information provided for this event; consequently, a thorough investigation could not be performed.Investigation into several of the harms reported in this complaint was performed from a clinical literature review, as well as an investigation into the design and risk of the biozorb product.The harms identified during this complaint are: major pain (pain/discomfort/failure to resorb), minor inflammation (swelling), major additional intervention (device explantation), hypersensitivity/allergic reaction.(itching sensation) a review of clinical literature performed on lumpectomies and their associated complications was performed.A summary of this review concluded that, while lumpectomy is a well-established option for breast cancer treatment, it inherently carries risks of complications, most notably infections, seroma formation, chronic pain, and wound healing issues.The literature demonstrates variation in complication rates based on surgical technique, additional therapies (such as intraoperative radiation therapy (iort) or radiation), and individual patient factors, with infection rates ranging from 2% to 10% and seroma rates from 11% to 65%.Chronic pain, particularly neuropathic pain, affects nearly one-third of patients.(kwee et al.(2024)), migration can be influenced by several patient related factors which can influence the likelihood of migration after lumpectomy, such as breast density, biopsy location, and biopsy approach.Per a study by ashali jain et al.(2017), marker migration is a relatively common occurrence following stereotactic biopsies, happening in 13% of cases.Swelling is one of the expected events that could occur after surgery and/or radiation therapy regardless of the use of a biozorb device.Due to this, confirmation of the swelling during this event as a normal course of surgery vs being caused by the biozorb cannot be done.Device explantation is based on the patient¿s physician¿s evaluation of their physical and health state and recommendation; therefore, an investigation into this intervention cannot be performed for this complaint.Though complications are relatively common, most are manageable with appropriate postoperative care, making lumpectomy a viable option for many breast cancer patients when carefully monitored and followed up.An investigation was performed by subject matter experts (sme¿s) into several of the harms identified as being experienced by the patient related to design, risk management, and clinical factors.The results of these investigations and potential causes can be seen below; however, it is important to note that these results do not include medical input from a qualified medical professional: pain: there is a lack of migration requirements and testing to evaluate if the device can cause tissue damage due to migration.Verification of mechanical strength and simulated use is not adequate due to several opportunities related to sampling size and test methods.The crystalline proportion in the device is unknown.Crystallinity may be causing irritation and foreign body reaction considering the long period of absorption of the device.There is a lack of usability testing evaluating the user needs, so there is no assurance that the surgical methods being used for the users are adequate.There is a lack of adequate user needs to capture appropriate design inputs, and therefore there are opportunities in design outputs and v&v activities.Migration: there is a lack of migration requirements and testing to evaluate if the device can cause tissue damage due to migration.The crystalline proportion in the device is unknown.High crystallinity may be causing migration/erosion considering the long period of absorption of the device.Verification of mechanical strength and simulated use is not adequate due to several opportunities related to sampling size and test methods.There is a lack of usability testing evaluating the user needs, so there is no assurance that the surgical methods being used for the users are adequate.There is a lack of adequate user needs to capture appropriate design inputs.Based on the clinical literature review, the harm reported to be experienced by the patient in the complaint are common symptoms from surgery and lumpectomies; therefore, confirmation of the biozorb causing the harms could not be done.However, based on the review of the top harms in regard to the biozorb design and risk documentation, the adverse events reported can be tracked back to a potential shared cause: lack of adequate user needs for the product.User needs define the framework for product development and lay the ground for the definition of design inputs, design outputs and later verification and validation activities.Other potential causes are related to inadequate test methods and/or the lack of evidence to support some specific product requirements.Conclusion: when comparing the safety outcomes of the biozorb marker with general lumpectomy complications, it becomes evident that some of the complications associated with biozorb may stem from the lumpectomy procedure itself.Both procedures share overlapping risks, although the biozorb device introduces additional considerations.However, it has been confirmed that the lack of defined user needs and inadequate test methods and testing evidence are potential root causes for the harm reported in this complaint.This cause will be further investigated and addressed in a capa.The risks associated with this complaint event are further described and evaluated against the product and its hazard analysis in the health risk assessment biozorb complaint analysis.Updates to the biozorb hazard analysis risk file will be monitored.Future events will be monitored and trended.Complaint confirmed: no device history record (dhr) review: a dhr review could not be performed because no lot information was provided.
Event or Problem Description
Hologic has received correspondence arising from litigation.The additional medical information provided revealed that the lot number of the device is a1-200915.No other relevant information was provided.This report is being submitted pursuant to 21 cfr part 803 based on information made available to hologic through litigation.Consistent with 21 cfr 803.16, the submission of this report is not intended, and shall not be construed, as an admission, acknowledgment, or confirmation by hologic that the device caused or contributed to the reportable event.
Additional Manufacturer Narrative
Hologic has received correspondence arising from litigation.The additional medical information provided revealed that the lot number of the device is a1-200915.No other relevant information was provided.This report is being submitted pursuant to 21 cfr part 803 based on information made available to hologic through litigation.Consistent with 21 cfr 803.16, the submission of this report is not intended, and shall not be construed, as an admission, acknowledgment, or confirmation by hologic that the device caused or contributed to the reportable event.A device history record (dhr) review was conducted for the reported lot number.The device was released meeting all qa specifications.

• Brand Name: BIOZORB
• Common Device Name: MARKER RADIOGRAPHIC IMPLANTABLE
• Manufacturer (Section D): HOLOGIC, INC.; 250 campus drive; marlborough MA 01752
• Manufacturer (Section G): HOLOGIC, INC.; 250 campus drive; marlborough MA 01752
• Manufacturer Contact: dara smithers ; 600 technology drive; coyol free park zone b24; newark, DE 20102
• MDR Report Key: 21938372
• Report Number: 1222780-2025-00229
• Device Sequence Number: 17450315
• Product Code: NEU
• Combination Product (Y/N): N
• Initial Reporter Country: US
• PMA/510(K) Number: K143484
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2021
• Device Explanted Year: 2025
• Serviced by Third Party (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Other,User Facility,Company Representative
• Initial Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial,Followup,Followup
• Report Date (Section B): 06/15/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Operator of Device: Health Professional
• Device Expiration Date: 02/28/2023
• Device Model Number: F0202
• Device Catalogue Number: F0202
• Device Lot Number: A1-200915
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: No
• Was the Report Sent to FDA?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 04/01/2025
• Supplement Date Received by Manufacturer: 11/13/2025; 06/01/2026
• Initial Report FDA Received Date: 04/30/2025
• Supplement Report FDA Received Date: 12/03/2025; 06/15/2026
• Was Device Evaluated by Manufacturer? (Y/N): No
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Other
• Patient Sex: Unknown