• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: KARL STORZ SE & CO. KG ELECTRODE, BIPOLAR

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

KARL STORZ SE & CO. KG ELECTRODE, BIPOLAR Back to Search Results
Model Number 011160-10
Medical Device Problem Codes Misconnection (1399); Device Dislodged or Dislocated (2923)
Health Effect - Clinical Code No Clinical Signs, Symptoms or Conditions (4582)
Date of Event 04/18/2025
Type of Reportable Event Serious Injury
Additional Manufacturer Narrative
The affected device has been requested for investigation by the manufacturer.Device was not returned at the time of mdr submission.The event is filed under internal karl storz complaint id: (b)(4).
 
Event or Problem Description
It was reported that the electrode was not fixed to the working element and continued to separate.As a result of inspecting both products, it was determined that the electrode was defective.The symptom of the defect was that there should have been a fixing groove, but the groove was not properly created.There was no direct impact on the patient, but since the surgery was extended by about 40 minutes the event is deemed reportable.
 
Additional Manufacturer Narrative
Result of investigation: the electrode clicks correct in place inside several different working elements.Stamped locking geometry is present and correct.Item 27040db will not be returned.According to the customer, the item was functional at the time of use.Since the cutting loops used were returned and no specific defect could be found during inspection, it cannot be ruled out that the cause lies in item 27040db itself - in particular in the area of handling.However, further analysis is not possible as the item is not available for inspection.The returned electrodes are in specification and lock in place with different working elements.The most likely responsible product - the working element has not been returned.Most likely, this working element has a defective electrode lock, as two batches of electrodes failed to lock at the customers working element, which work fine over here with other working elements.According to our data analysis, there are no comparable defects in other items or complaints of this type.Without the article 27040db, the exact root cause cannot be conclusively determined.A possible root cause could be improper preparation of the item, which could have led to a functional impairment.Alternatively, excessive force during use cannot be ruled out.No corrective actions are required, as no critical and/or systematic deviations were identified during the investigation.However, the customer will be reminded and made aware of the right handling.The event is filed under internal karl storz complaint id: (b)(4).
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
ELECTRODE, BIPOLAR
Common Device Name
ELECTRODE, BIPOLAR
Manufacturer (Section D)
KARL STORZ SE & CO. KG
dr.-karl-storz-strasse 34
tuttlingen, 78532
GM  78532
MDR Report Key21952187
Report Number2020550-2025-00753
Device Sequence Number21112732
Product Code FAS
UDI-Device Identifier04048438005408
UDI-Public04048438005408
Combination Product (Y/N)N
Initial Reporter CountryKS
Number of Events Summarized1
Summary Report (Y/N)N
Serviced by Third Party (Y/N)Unknown
Reporter Type Importer
Initial Reporter Occupation Other Health Care Professional
Type of Report Initial,Followup
Report Date (Section B) 08/23/2025
Report Date (Section F) 08/21/2025
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? Yes
Operator of Device Health Professional
Device Model Number011160-10
Device Catalogue Number011160-10
Device Lot NumberOL91
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Was the Report Sent to FDA? No
Distributor Facility Aware Date04/25/2025
Event Location Hospital
Date Report to Manufacturer08/21/2025
Initial Date Received by Manufacturer Not provided
Supplement Date Received by ManufacturerNot provided
Initial Report FDA Received Date05/02/2025
Supplement Report FDA Received Date08/23/2025
Is This a Single-Use Device that was
Reprocessed and Reused on a Patient? (Y/N)
No
Patient Sequence Number1
Outcome Attributed to Adverse Event Other;
Patient SexUnknown
-
-