MAUDE Adverse Event Report: DEPUY IRELAND - 9616671 FLAT OSTEO 10MM X 7 3/4 IN; KNEE INSTRUMENT : CUTTING INSTRUMENTS

Catalog Number	242105000
Medical Device Problem Codes	Break (1069); Crack (1135)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	04/11/2025
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
It was reported that the devices were chipped and cracked.It didn't happen in surgery.
Additional Manufacturer Narrative
Product complaint # (b)(4).Investigation summary: an analysis of the product could not be performed since a physical sample was not received for evaluation.As part of our company quality system process, all devices are manufactured, inspected, and distributed to approved specifications.Additional complaint information monitoring for potential safety signals will be conducted through complaint trending as part of the post-market surveillance.However, if the product is received at a later date, the investigation will be updated as applicable.
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information that has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.H11 additional narrative: added: h6 health effect impact code.If information that was not available for the initial report is obtained, a follow-up report will be filed as appropriate.
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information that has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.If information that was not available for the initial report is obtained, a follow-up report will be filed as appropriate.
Additional Manufacturer Narrative
Product complaint#: (b)(4).Investigation summary: it was reported that the devices were chipped and cracked.It didn't happen in surgery.The product was returned to j&j medtech orthopaedics for evaluation.Visual inspection of the returned device revealed that its handle base is chipped and cracked.The device shows signs if repetitive use during a long period of time.No other anomalies were noted.The observed condition was identified as an end of life indicator; damage consistent with repeated use and servicing.The lifecycle requirements of the device are event related and depend on the use and inspection of the device in clinical practice.As the device can be damaged on the first or 100th use, the device must be properly inspected prior to each surgical use.Refer to the device/country specific ifu for information related to end of life, reprocessing instructions, and inspection procedures.A dimensional inspection was not performed since it was not applicable to the complaint condition.A functional test was not performed since it was not applicable to the complaint condition.The overall complaint was confirmed as the observed condition of the flat osteo 10mm x 7 3/4 in would have contributed to the complained device issue.Based on the investigation findings, the potential cause is traced to end of life, and it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the reported complaint condition.As part of j&j medtech orthopaedics quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot: a device history record (dhr) review or manufacturing records evaluation (mre) was not possible because the date code aa1095 provided is not a valid finished goods lot number.H11 additional narrative: corrected: h3.

• Brand Name: FLAT OSTEO 10MM X 7 3/4 IN
• Common Device Name: KNEE INSTRUMENT : CUTTING INSTRUMENTS
• Manufacturer (Section D): DEPUY IRELAND - 9616671; loughbeg ringaskiddy co.; cork ; EI
• Manufacturer Contact: elba bello ; 700 orthpaedic dr.; warsaw, IN 46581 ; 9083863534
• MDR Report Key: 21954170
• Report Number: 1818910-2025-06980
• Device Sequence Number: 20970866
• Product Code: HWM
• UDI-Device Identifier: 10603295122753
• UDI-Public: (01)10603295122753(10)AA1095
• Combination Product (Y/N): N
• Initial Reporter State: PA
• Initial Reporter Country: US
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 242105000
• Device Lot Number: AA1095
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 04/11/2025
• Supplement Date Received by Manufacturer: 05/23/2025; 07/29/2025; 08/07/2025; 08/13/2025
• Initial Report FDA Received Date: 05/02/2025
• Supplement Report FDA Received Date: 05/26/2025; 07/31/2025; 08/11/2025; 08/14/2025
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 10/15/1995
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Patient Sex: Unknown