MAUDE Adverse Event Report: DEPUY IRELAND - 3015516266 HPUNI FEM FINISH BLK SZ3 LMRL; INSTRUMENT, CUTTING, ORTHOPEDIC

Catalog Number	252530300
Medical Device Problem Codes	Incorrect Measurement (1383); No Apparent Adverse Event (3189)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	04/11/2025
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Depuy orthopaedics is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy orthopaedics has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy orthopaedics or its employees that the report constitutes an admission that the device, depuy orthopaedics, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.Additional narrative: if information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
It was reported that on (b)(6) 2025, the person in charge checked the products and found that there were differences between the products and the cad models.Specifically, the differences are as follows: chisel actually goes approximately 1mm deeper than it¿s observed in nx models for all finishing guides lm sz 1-4 on my end.Size 2 lm shown below no surgical delay.No patient consequences.
Additional Manufacturer Narrative
Product complaint #(b)(4).This product was reported in error.No patient death, serious injury or evidence of reportable product malfunction occurred.Depuy considers the investigation closed at this time.Should any additional information be received to change the outcome of the performed investigation, the complaint will be re-opened.

• Brand Name: HPUNI FEM FINISH BLK SZ3 LMRL
• Common Device Name: INSTRUMENT, CUTTING, ORTHOPEDIC
• Manufacturer (Section D): DEPUY IRELAND - 3015516266; loughbeg ringaskiddy co.; cork ; EI
• Manufacturer Contact: elba bello ; 700 orthopaedic dr.; warsaw, IN 46581 ; 9083863534
• MDR Report Key: 21963420
• Report Number: 1818910-2025-07093
• Device Sequence Number: 7272993
• Product Code: HTZ
• UDI-Device Identifier: 10603295544555
• UDI-Public: (01)10603295544555(10)SO2060648
• Combination Product (Y/N): N
• Initial Reporter Country: JA
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 252530300
• Device Lot Number: SO2060648
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 04/11/2025
• Supplement Date Received by Manufacturer: 06/27/2025
• Initial Report FDA Received Date: 05/05/2025
• Supplement Report FDA Received Date: 07/04/2025
• Was Device Evaluated by Manufacturer? (Y/N): No
• Date Device Manufactured: 09/28/2023
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Patient Sex: Unknown