MAUDE Adverse Event Report: MEDTRONIC NAVIGATION, INC. (BOXBOROUGH) O-ARM O2 IMAGING SYSTEM; INTERVENTIONAL FLUOROSCOPIC X-RAY SYSTEM

Model Number	BI70002000
Medical Device Problem Code	Failure to Advance (2524)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	06/16/2025
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
H3, h6) the manufacture representative went to the site to test the imaging system and replaced cross threaded winch.Performed a medtronic check out which all test passed.Mdr codes: b01, c07, d02 h3, h6) the component was returned to the manufacturer for analysis.Analysis found that unable to confirm reported complaint, "gantry not opening." test winch motor assembly with motion cart.Forward and backwards motion passed, brake was engaging and disengaging as normal.Winch assembly functioned as normal.Visual inspection showed normal wear.No functional fault found.Mdr codes: b01, c19, d14 return date: 2025-06-27 continuation of d10: section d information references the main component of the system.Other relevant device(s) are: product id: bi71000429, serial/lot#: (b)(6), product id: bi71000674, product id: bi71000429, product id: bi71000674.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
Event or Problem Description
Medtronic received information regarding an imaging system being used for procedure.It was reported that the gantry was not opening or closing.There was unknown patient present during the event.
Additional Manufacturer Narrative
H2.H6)the component was returned to the manufacturer for analysis.Analysis found that the unable to confirm reported complaint.Test winch motor assembly with motion cart.Forward and backwards motion passed, brake was engaging and disengaging as normal.Winch assembly functioned as normal.Visual inspection shows normal wear.No functional fault found.B01,c19,d14 are applicable continuation of d10: section d information references the main component of the system.Other relevant device(s) are: product id: bi71000429, serial/lot #: (b)(6) rev.K.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.

• Brand Name: O-ARM O2 IMAGING SYSTEM
• Common Device Name: INTERVENTIONAL FLUOROSCOPIC X-RAY SYSTEM
• Manufacturer (Section D): MEDTRONIC NAVIGATION, INC. (BOXBOROUGH); 200 beaver brook rd; boxborough,ma 45640 ; MX 45640
• Manufacturer (Section G): MEDTRONIC NAVIGATION, INC. (BOXBOROUGH); 200 beaver brook rd; boxborough,ma 45640 ; MX 45640
• Manufacturer Contact: justin ellis ; 8200 coral sea street ne mvs21; mounds view, MN 55112 ; 7635265677
• MDR Report Key: 22383706
• Report Number: 3006544299-2025-00613
• Device Sequence Number: 20998526
• Product Code: OWB
• UDI-Device Identifier: 00763000068097
• UDI-Public: (01)00763000068097(11)180809
• Combination Product (Y/N): N
• Initial Reporter State: IL
• Initial Reporter Country: US
• PMA/510(K) Number: K200074
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Health Professional
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup
• Report Date (Section B): 08/01/2025

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: BI70002000
• Device Catalogue Number: BI70002000
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 06/27/2025
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 06/16/2025
• Supplement Date Received by Manufacturer: 07/09/2025
• Initial Report FDA Received Date: 07/02/2025
• Supplement Report FDA Received Date: 08/01/2025
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 08/09/2018
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Reuse
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: "SEE H11...."; SEE H11
• Patient Sex: Unknown