MAUDE Adverse Event Report: SYNTHES GMBH SYNFIX EVOLUTION AIMING DEVICE HOLDER; IMPACTOR

Catalog Number	03.835.004
Medical Device Problem Code	Mechanical Problem (1384)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	06/18/2025
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported the insertion instrument and sleeve did not function properly.The outer sleeve does not retract and is very difficult to separate.There was no consequences for the patient.There was no delay in the procedure.
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.H11 additional manufacturer narrative: d4: udi: as the lot number for the device involved in the event was not provided, the full udi is currently not available.E1 initial reporter address line 1: (b)(6).
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: added: b5.H3, h6: product was not returned.Based on the information available, it has been determined that no corrective and preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
Additional information received states that this was a preoperative event.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: added: d4 (lot), d9 and h4.Corrected: d4 (primary udi number).H3, h6: the device was received, the investigation is in progress, no conclusion could be drawn at the time of filing this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: corrected: g1.H3, h6: the product was returned to j&j medtech orthopaedics for evaluation.Visual inspection of the returned device found inner mechanism of the device is jammed.A potential reason for this condition can be traced to a possible damage of the internal components of the locking mechanism.However, due to the inability to access these internal components without damaging the device, the potential cause remains as not established.A dimensional inspection was not performed since it was not applicable to the complaint condition.A functional evaluation was performed using the internal mechanism of the synfix evolution aiming device holder, after several attempts were the sleeve moved with difficulty, the mechanism got stuck at a final attempt, therefore, the reported condition was able to be replicated.The overall complaint was confirmed as the observed condition of the synfix evolution aiming device holder would have contributed to the complained device issue.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the reported complaint condition.As part of j&j medtech orthopaedics quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history review: part# 03.835.004.Lot # l453515.Manufacturing site: werk hägendorf.Release to warehouse date: 09 jun 2017.A manufacturing record evaluation was performed for the finished article lot and no non-conformances were identified.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.

• Brand Name: SYNFIX EVOLUTION AIMING DEVICE HOLDER
• Common Device Name: IMPACTOR
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): WERK HAEGENDORF; im bifang 6; haegendorf CO ; SZ
• Manufacturer Contact: elba bello ; 1302 wright lane east; west chester, PA 19380 ; 9083863534
• MDR Report Key: 22554377
• Report Number: 8030965-2025-07299
• Device Sequence Number: 21278235
• Product Code: HWA
• UDI-Device Identifier: 07611819677043
• UDI-Public: (01)07611819677043(10)L453515
• Combination Product (Y/N): N
• Initial Reporter Country: NL
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 03.835.004
• Device Lot Number: L453515
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 07/02/2025
• Supplement Date Received by Manufacturer: 07/31/2025; 08/11/2025; 08/27/2025
• Initial Report FDA Received Date: 07/21/2025
• Supplement Report FDA Received Date: 08/04/2025; 08/12/2025; 08/28/2025
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 06/09/2017
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Patient Sex: Unknown