|
Zimvie complaint number (b)(4).The following fields have been updated: b4: date of this report b5: describe event or problem g3: date received by manufacturer g6: type of report h1: type of reportable event h2: follow up type h3: device evaluated by manufacturer h6: adverse event problem h10: additional narrative zimvie received one (1) tascd24, (tsv angled screw channel driver 24mm) for evaluation.Visual evaluation was performed, the driver has signs of use.The driver¿s tip is fractured.The fractured piece was not returned.Dhr review was completed for the subject lot number 1282246.No deviations or non-conformances, which could have caused or contributed to the reported event, were noted as part of the dhr.Complaint history review was performed for the reported lot number 1282246 for similar events and 2 other relevant complaint(s) were identified.Review completed utilizing keywords: ¿dental : functional : fracture¿ based on the investigation and risk management file review, the most likely root cause determined from the investigation was customer error, applying to much torque.Therefore, based on the available information, a device malfunction did occur.The driver¿s tip was fractured.The reported event was confirmed.No further investigation or immediate capa / hhe/d escalation is required, as the complaint investigation did not confirm the products were nonconforming at the time of distribution, and no new failure mode, harm, or hazardous situation was identified through the investigation performed.At this time, the complaint investigation has been completed and the record will be closed.If additional information is received, the record will be re-opened for further evaluation.
|