|
Product complaint # (b)(4).Date sent to the fda: 7/23/2025.H6 component code: g07002 - no device problem found.This report is being submitted pursuant to the provisions of 21 cfr, part 803, part 4 subpart b.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.A manufacturing record evaluation was performed for the finished device lot, and no non-conformances were identified.H3 investigational summary: the product was returned to ethicon for evaluation.One winding former with seven needle suture combinations, one detached needle and one dispensed suture outside the foil packet were received for analysis.The product code vcp752d is multistrand and contains eight strands per packet.After investigation of the sample, short insertion was observed in the strand.The visual inspection concluded that the combination of the needle/suture was detached from the needle since the insertion end of the suture did not meet the requirement.In addition, seven needle-suture combinations were visually inspected, the swage and attachment area were noted to be as expected in all needles.As the suture is absorbable and the duration of exposure of the suture in the environment could not be determined, the functional test could not be performed.Based on the information currently available, short insertion issue was identified as pull out during the investigation of the sample received.This product issue will be addressed through the ethicon quality system.Additional complaint information monitoring for potential safety signals will be conducted through complaint trending as part of post-market surveillance.
|