MAUDE Adverse Event Report: DEPUY MITEK LLC US VAPR3 FOOTSWITCH *EA; ARTHROSCOPE

Catalog Number	225023
Medical Device Problem Codes	Use of Device Problem (1670); Output Problem (3005)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	07/29/2025
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H11 additional narrative: as of this date, the device has not been returned for evaluation; therefore, the reported condition cannot be confirmed and/or duplicated.
Event or Problem Description
It was reported that during an arthroscopic rotator cuff repair (arcr) surgical procedure while using the vapr controls device, it was observed that the surgeon opened the brand-new electrode and connected it to the handpiece properly.After about an hour of use, the blue footswitch (for hemostasis) suddenly stopped working even though the surgeon stepped on it.The yellow footswitch (for evaporation) was working normally.The area that needed to be treated was small, so the surgeon only used the evaporation function.The blue footswitch was reconnected but the device was in use with the vapr 3.5mm side 21 deg -ea device and the vapr vue generator device.There was a delay in the procedure of not more than thirty minutes.There were no reports of injuries, medical intervention or prolonged hospitalization.No additional information was provided.This is report 1 of 2 of (b)(4).
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
It was reported that during an arthroscopic rotator cuff repair (arcr) surgical procedure while using the vapr controls device, it was observed that the surgeon opened the brand-new electrode and connected it to the vapr handpiece *ea device properly.After about an hour of use, the blue vapr3 footswitch *ea (for hemostasis) suddenly stopped working even though the surgeon stepped on it.The yellow footswitch (for evaporation) was working normally.The area that needed to be treated was small, so the surgeon only used the evaporation function.The blue footswitch was reconnected but the condition did not change, and the blue footswitch did not work.There were no ¿error¿ or ¿fault¿ messages on the screen.There were 3x vapr handpiece *ea devices, a vapr 3.5mm side 21 deg -ea device, a vapr3 footswitch *ea device and a vapr vue generator device used in the procedure.There was a delay in the procedure of not more than thirty minutes.There were no reports of injuries, medical intervention or prolonged hospitalization.No additional information was provided.This is report 1 of 6 of (b)(4).
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H.11.Additional narrative: the complaint device was not returned to j&j medtech orthopaedics, therefore unavailable for a physical evaluation.A manufacturing record evaluation was performed for the finished device, and no non-conformance was identified.Based on the current available information, we cannot determine a root cause for the reported failure.If the complaint device is received in the future, we will reopen the complaint and perform the investigation as appropriate.It has been determined that no corrective and/or preventative action is proposed and there is no indication that a design or manufacturing issue has caused the reported complaint condition.As part of j&j medtech orthopaedics quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot: a manufacturing record evaluation was performed for the finished device, and no non-conformance was identified.

• Common Device Name: ARTHROSCOPE
• Manufacturer (Section D): DEPUY MITEK LLC US; 325 paramount drive; raynham MA 02767
• Manufacturer (Section G): DEPUY MITEK LLC US; 325 paramount drive; raynham 02767
• Manufacturer Contact: kate karberg ; 325 paramount drive; raynham, MA 02767 ; 3035526892
• MDR Report Key: 22738526
• Report Number: 1221934-2025-03021
• Device Sequence Number: 20614268
• Product Code: HRX
• UDI-Device Identifier: 10886705009114
• UDI-Public: (01)10886705009114(10)2411001
• Combination Product (Y/N): N
• Initial Reporter Country: JA
• PMA/510(K) Number: K041135
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,User Facility,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup,Followup
• Report Date (Section B): 08/07/2025

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 225023
• Device Lot Number: 2411001
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 07/28/2025
• Supplement Date Received by Manufacturer: 08/04/2025; 08/12/2025; 09/05/2025
• Initial Report FDA Received Date: 08/07/2025
• Supplement Report FDA Received Date: 08/12/2025; 08/12/2025; 09/08/2025
• Was Device Evaluated by Manufacturer? (Y/N): No
• Date Device Manufactured: 11/04/2024
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Patient Sex: Unknown